Document Workstations

Perfect for supervisory or general workshop use, these units combine secure storage with a sloping worksurface. All steel construction with epoxy powder coated grey/blue finish with reinforced, lockable doors, two adjustable shelves, two internal drawers and a sloping writing surface.

Information Station

Basic workstation complete with drywipe/magnetic rear surface.

Matlock Industrial Cupboards and Lockers

Combining robust design with a heavy gauge "double skin" door to guard against leverage and impact, these lockers are hard to beat when it comes to long-lasting security. Supplied with key operated deadlock and 2 keys as standard.

Picture illustrates door combination only, for door colour refer to description.

Heavy Duty Steel Lockers

Steel Lockers

Steel lockers with a vibrant Design and choice of colour to suit any environment. Each compartment has air vents that allows each compartment to breathe. 10 disc secure locking system supplied with two keys as standard giving a high level of security. All doors are manufactured from 0.9mm steel and to add further strength and rigidity a steel channel is welded into the inside of every door and each compartment. Lockers are supplied in a quality cardboard box to ensure they arrive to you in pristine condition.

Replacement Parts for Kennedy® Huntington Type Dressers





Side Washer for Type No.1

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Modular Coolant Hose System

Circle Flow System

Kennedy® Industrial Key Steel

High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.

Rectangular - Metric

Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 35. Surface Finish: Manganese Phosphate.

FC04 - Flanged Nut

Matlock Industrial Cupboards and Lockers

The Matlock garment dispenser lockers have a single service door provides access to all the inner compartments of these garment dispensers enabling the distribution of clean garments, towels, etc. Individual compartments remain secure and require keyed access.

Garment Dispenser Locker

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.