Maintenance Trolleys

Heavy gauge metal construction, manoeuvred on 125mm rubber castors, two of which swivel, two with brake. Central locking drawer stacks and individual trigger locks to prevent accidental opening. Metal top tray with 3 raised edges and inlaid mat.
Capacity: 40kg UDL. All units are 550mm deep and 925mm high.

1000mm wide Maintenance Trolley

1x 75mm, 5x 125mm drawers and 1x 700mm cupboard

Wall Mounted Tool Cabinets

Optimise your storage area by using the walls. Pre-punched for wall fixing, ideal for positions above benching or machinery. Fully welded construction. Available in two sizes. 75mm high simple steel drawer units with integral handle. Espagnolette two point locking with flush fitting handle. Adjustable shelves.
Finished in epoxy powder coat - grey/blue.

Engineers Workbenches

Available with the following worktop finishes.
Wisa - Laminated ply core with mid grey polypropylene face. An easy clean top with good resistance to oil, grease, mild alkalis and weak acids.
Mfc - Particle board core with light grey laminate face. A light duty easy clean top suitable for assembly or office environments.
Mpx - Laminated beech ply. A tough, general duty top suitable for most applications.

Cantilever bench

Perfect for assembly applications, the cantilever frame comes complete with a 20mm worktop in either multiplex or mfc.
Full range of accessories available, including overhead kits
and suspended cabinets. Flat packed for self assembly.
Height: 780mm.

Engineers Workbenches

The frame mounts securely to the bench leg of any static bench on this page. Backpanel is available in 3 types:
perforated, louvred or combi.
1115mm high (above worktop).
Twin tube 240v light.
200mm deep shelf.
457mm high steel panel.

Overhead kit

For drawers 800 x 750mm (W x D)

13 Compartment

Storage Cupboards

General storage cupboards with 50kg UDL capacity per shelf. All shelves adjustable on 25mm pitch. 1m or 2m high, 550mm deep, 750 or 1000mm wide, 2 point locking mechanism.

Perfo Storage Accessories

The accessories are quickly secured to our Perfo panels with our Perfolock and may be repositioned at any time. All items are manufactured from steel and are zinc plated to give a long, corrosion-resistant life. The standard kits provide easy selection and ordering for Perfo accessories. For custom layouts choose from our range of Perfo accessories. Securely fastened to panels in seconds with Perfolock clips. Remove or reposition as required. Hook ends capped for safety.

Combination Holder

Perfo Wall Panel Clips

Each set is supplied with the illustrated Perfo accessories (excluding tools). Additional components from the Perfo range can be added to sets as required. Louvre panels.

Engineers Workbenches

Available with the following worktop finishes.
Wisa - Laminated ply core with mid grey polypropylene face. An easy clean top with good resistance to oil, grease, mild alkalis and weak acids.
Mfc - Particle board core with light grey laminate face. A light duty easy clean top suitable for assembly or office environments.
Mpx - Laminated beech ply. A tough, general duty top suitable for most applications.

Pedestal bench

For optimum access and flexibility each pedestal bench leg is adjustable, giving height adjustment from 780 - 930mm.
The 30mm worktop is available in multiplex or wisa.

Engineers Workbenches

Available with the following worktop finishes.
Wisa - Laminated ply core with mid grey polypropylene face. An easy clean top with good resistance to oil, grease, mild alkalis and weak acids.
Mfc - Particle board core with light grey laminate face. A light duty easy clean top suitable for assembly or office environments.
Mpx - Laminated beech ply. A tough, general duty top suitable for most applications.

Framework bench

A tough steel section framework, braced and finished in RAL7035 grey epoxy powder coat.
The 30mm worktop is available in multiplex or wisa. Full range of accessories available, including overhead kits and suspended cabinets. Flat packed for self assembly.
Height: 780mm.