Engineers' Fully Welded Mobile Workbenches

Fully welded mobile benches - delivered ready to use. Choice of regular 2mm steel plate worktop or 20mm Beech layered worktop. Long life epoxy powder coat. Heavy duty steel framework with base shelf. Handle fitted to all mobile units. 125mm diameter castor set on mobile units. All units are 600mm deep and 910mm high.

1000mm Wide Workbenches

Mobile Bench. Steel Worktop Finish.

Tilt Boxes

The tilt box system is based on a range of clip together plastic housings, which contain transparent small parts boxes with a forward tilt action to give access. Tilt box storage is useful in all environments including office, retail and manufacturing providing highly visible, dense and dust protective storage for most small components. Choose the individual models, or the mixed kit of the 9/6/5/4 compartment versions.
All models are 600mm wide.

Drawer Divider Kits

Customise your storage system with a high quality range of drawer division accessories. Steel variable divider kits
manufactured from galvanised sheet steel or plastic box kits in RAL7011 impact resistant polystyrol.

For drawers 800 x 650mm (W xD)

8 Compartment

Drawer Divider Kits

Customise your storage system with a high quality range of drawer division accessories. Steel variable divider kits
manufactured from galvanised sheet steel or plastic box kits in RAL7011 impact resistant polystyrol.

For drawers 650 x 650mm (W xD)

8 Compartment

Engineers Workbenches

Available with the following worktop finishes.
Wisa - Laminated ply core with mid grey polypropylene face. An easy clean top with good resistance to oil, grease, mild alkalis and weak acids.
Mfc - Particle board core with light grey laminate face. A light duty easy clean top suitable for assembly or office environments.
Mpx - Laminated beech ply. A tough, general duty top suitable for most applications.

Cantilever bench

Perfect for assembly applications, the cantilever frame comes complete with a 20mm worktop in either multiplex or mfc.
Full range of accessories available, including overhead kits
and suspended cabinets. Flat packed for self assembly.
Height: 780mm.

Heavy Duty Mobile Cabinets

Mobile cabinets for on-site storage. Centrally lockable and finished in epoxy powder coat RAL7035/RAL5010. Designed with safety in mind, features include: Push/pull handle. 125mm castor set 300kg capacity (2 fixed, 2 swivel as standard & brake).
Anti roll off top tray and mat. Drawer blocking mechanism to prevent tipping. Safety trigger on each drawer to prevent accidental opening. 75kg U.D.L. capacity per drawer with 100% extension slides.

525 x 525mm (W x D)

Tilt Boxes

The tilt box system is based on a range of clip together plastic housings, which contain transparent small parts boxes with a forward tilt action to give access. Tilt box storage is useful in all environments including office, retail and manufacturing providing highly visible, dense and dust protective storage for most small components. Choose the individual models, or the mixed kit of the 9/6/5/4 compartment versions.
All models are 600mm wide.

Bench stands and bench kits

Tilt box units can be located within this bench top stand which will accept any combination of tilt boxes within the usable height of 500mm. Supplied in red only.
The most popular tilt box combination is shown. Dimensions:
610 x 150 x 500mm (W x D x H).

For drawers 800 x 750mm (W x D)

9 Compartment

Engineers Workbenches

The frame mounts securely to the bench leg of any static bench on this page. Backpanel is available in 3 types:
perforated, louvred or combi.
1115mm high (above worktop).
Twin tube 240v light.
200mm deep shelf.
457mm high steel panel.

Overhead kit