Heavy Duty Tool Storage System

Heavy duty industrial cupboards with double locking doors. Finished in epoxy powder coat RAL7035 with doors in blue RAL5010. Perforated door liners will accept tool holders. Security is ensured by a 3 point locking system. Shelves and drawers are adjustable on a 25mm pitch. Drawer dividers are available separately. Load capacity per shelf 100kg. 75kg U.D.L. capacity per drawer with 100% extension slides. Overall load capacity 1.5 ton.
Dimensions (W x D x H): 1050 x 650 x 2000mm.

Steel Divider Kits - to suit Drawer 100/125mm (15 Compartments)

Tilt Boxes

The tilt box system is based on a range of clip together plastic housings, which contain transparent small parts boxes with a forward tilt action to give access. Tilt box storage is useful in all environments including office, retail and manufacturing providing highly visible, dense and dust protective storage for most small components. Choose the individual models, or the mixed kit of the 9/6/5/4 compartment versions.
All models are 600mm wide.

Drawer Divider Kits

Customise your storage system with a high quality range of drawer division accessories. Steel variable divider kits
manufactured from galvanised sheet steel or plastic box kits in RAL7011 impact resistant polystyrol.

For drawers 650 x 650mm (W xD)

9 Compartment

Heavy Duty Tool Storage System

Heavy duty industrial cupboards with double locking doors. Finished in epoxy powder coat RAL7035 with doors in blue RAL5010. Perforated door liners will accept tool holders. Security is ensured by a 3 point locking system. Shelves and drawers are adjustable on a 25mm pitch. Drawer dividers are available separately. Load capacity per shelf 100kg. 75kg U.D.L. capacity per drawer with 100% extension slides. Overall load capacity 1.5 ton.
Dimensions (W x D x H): 1050 x 650 x 2000mm.

Complete with 4x Shelf

Supplied with basic 2m high cupboard and two perforated door liners as standard.

Perfo Storage Accessories

The accessories are quickly secured to our Perfo panels with our perfolock and may be repositioned at any time. All items are manufactured from steel and are zinc plated to give a long, corrosion resistant life. The standard kits provide easy selection and ordering for Perfo accessories. For custom layouts choose from our range of Perfo accessories. Securely fastened to panels in seconds with perfolock clips. Remove or reposition as required. Hook ends capped for safely.

Hexagon Key Holder

Tilt Boxes

The tilt box system is based on a range of clip together plastic housings, which contain transparent small parts boxes with a forward tilt action to give access. Tilt box storage is useful in all environments including office, retail and manufacturing providing highly visible, dense and dust protective storage for most small components. Choose the individual models, or the mixed kit of the 9/6/5/4 compartment versions.
All models are 600mm wide.

Bench stands and bench kits

Tilt box units can be located within this bench top stand which will accept any combination of tilt boxes within the usable height of 500mm. Supplied in red only.
The most popular tilt box combination is shown. Dimensions:
610 x 150 x 500mm (W x D x H).

Engineers Workbenches

Available with the following worktop finishes.
Wisa - Laminated ply core with mid grey polypropylene face. An easy clean top with good resistance to oil, grease, mild alkalis and weak acids.
Mfc - Particle board core with light grey laminate face. A light duty easy clean top suitable for assembly or office environments.
Mpx - Laminated beech ply. A tough, general duty top suitable for most applications.

Framework bench

A tough steel section framework, braced and finished in RAL7035 grey epoxy powder coat.
The 30mm worktop is available in multiplex or wisa. Full range of accessories available, including overhead kits and suspended cabinets. Flat packed for self assembly.
Height: 780mm.

Bott PPE & Janitorial Cupboards - Plain & Ventilated Doors

Specialist versions of the kitted cupboards. Three point locking doors. Galvanised shelves with 50kg UDL capacity. Roller bearing drawers with 50kg UDL capacity per drawer. Ventilated doors aid drying and allow quick visual stock check. Central vertical partition allows easy separation of clean/dirty items and gives space for tall products such as brooms or mops. Hanging rail options offers easy storage of clothes.
1 or 2m high, 500, 750 or 1000mm wide. All shelves adjustable on 25mm pitch.

Shelf Capacity 50kg Uniformly Distributed Load

Cupboards with Plain Doors

Size WxDxH): 750 x 550 x 1000mm
No of shelves: 2

Mobile Cabinets

A range of engineers trolleys for storage on the move. Metal top tray with 3 raised edges and inlaid mat. Central locking and full depth push and pull handle. Each drawer has a safety trigger to prevent accidental opening. All units are 550mm deep and 925mm high. Available in 750 or 1000mm widths.
Each unit has 125mm diameter castors (2 with brake).

750mm wide Mobile Cabinet

4x 175mm drawers

Storage Benches

Heavy duty benches with welded tubular steel frameworks and tough 40mm thick multiplex worktops. The integrated storage units feature lockable cupboards and 75kg U.D.L. capacity per drawer with 100% extension slides. All benches are supplied fully assembled ready for immediate use. Benches are 750mm deep and 840mm high.
Drawer dividers available - supplied separately

Width 1500mm

2x 150mm drawers,
1x 200mm drawer,
1x 500mm cupboard