Bott Verso?Storage Benches

30mm thick multiplex worktops. Lockable cupboards. All benches are supplied fully assembled ready for immediate use.
All models are 600mm deep and height adjustable from 780 - 930mm.
Drawer dividers available - supplied separately.

Width 1250mm

2x 500mm drawer,
2x cupboard

Drawer Divider Kits

Customise your storage system with a high quality range of drawer division accessories. Steel variable divider kits
manufactured from galvanised sheet steel or plastic box kits in RAL7011 impact resistant polystyrol.

For drawers 800 x 650mm (W xD)

8 Compartment

Heavy Duty Tool Storage System

Heavy duty industrial cupboards with double locking doors. Finished in epoxy powder coat RAL7035 with doors in blue RAL5010. Perforated door liners will accept tool holders. Security is ensured by a 3 point locking system. Shelves and drawers are adjustable on a 25mm pitch. Drawer dividers are available separately. Load capacity per shelf 100kg. 75kg U.D.L. capacity per drawer with 100% extension slides. Overall load capacity 1.5 ton.
Dimensions (W x D x H): 1050 x 650 x 2000mm.

Steel Divider Kits - to suit Drawer 100/125mm (10 Compartments)

Engineers Workbenches

Available with the following worktop finishes.
Wisa - Laminated ply core with mid grey polypropylene face. An easy clean top with good resistance to oil, grease, mild alkalis and weak acids.
Mfc - Particle board core with light grey laminate face. A light duty easy clean top suitable for assembly or office environments.
Mpx - Laminated beech ply. A tough, general duty top suitable for most applications.

Cantilever bench

Perfect for assembly applications, the cantilever frame comes complete with a 20mm worktop in either multiplex or mfc.
Full range of accessories available, including overhead kits
and suspended cabinets. Flat packed for self assembly.
Height: 780mm.

Engineers' Fully Welded Static Workbenches

Fully welded static benches available - delivered ready to use. Choice of regular 2mm steel plate worktop or 20mm Beech layered worktop. Long life epoxy powder coat. Heavy duty steel framework with base shelf. All units are 600mm deep and 910mm high.

1500mm Wide Workbenches

Static Bench. Multiplex Beech Worktop Finish.

Perfo Storage Accessories

The accessories are quickly secured to our Perfo panels with our perfolock and may be repositioned at any time. All items are manufactured from steel and are zinc plated to give a long, corrosion resistant life. The standard kits provide easy selection and ordering for Perfo accessories. For custom layouts choose from our range of Perfo accessories. Securely fastened to panels in seconds with perfolock clips. Remove or reposition as required. Hook ends capped for safely.

Plier Hooks (Pack of 5)

Engineers' Fully Welded Static Workbenches

Fully welded static benches available - delivered ready to use. Choice of regular 2mm steel plate worktop or 20mm Beech layered worktop. Long life epoxy powder coat. Heavy duty steel framework with base shelf. All units are 600mm deep and 910mm high.

1000mm Wide Workbenches

Static Bench. Multiplex Beech Worktop Finish.

Bott Verso?Storage Benches

30mm thick multiplex worktops. Lockable cupboards. All benches are supplied fully assembled ready for immediate use.
All models are 600mm deep and height adjustable from 780 - 930mm.
Drawer dividers available - supplied separately.

Width 2000mm

2x 500mm 3 drawer,
1x 750mm 3 drawer

Engineers Workbenches

The frame mounts securely to the bench leg of any static bench on this page. Backpanel is available in 3 types:
perforated, louvred or combi.
1115mm high (above worktop).
Twin tube 240v light.
200mm deep shelf.
457mm high steel panel.

Overhead kit

Drawer Divider Kits

Customise your storage system with a high quality range of drawer division accessories. Steel variable divider kits
manufactured from galvanised sheet steel or plastic box kits in RAL7011 impact resistant polystyrol.

For drawers 650 x 650mm (W xD)

8 Compartment