Engineers Workbenches

The frame mounts securely to the bench leg of any static bench on this page. Backpanel is available in 3 types:
perforated, louvred or combi.
1115mm high (above worktop).
Twin tube 240v light.
200mm deep shelf.
457mm high steel panel.

Overhead kit

Drawer Divider Kits

Customise your storage system with a high quality range of drawer division accessories. Steel variable divider kits
manufactured from galvanised sheet steel or plastic box kits in RAL7011 impact resistant polystyrol.

For drawers 525 x 525mm (W xD)

5 Compartment

For drawers 1050 x 750mm (W x D)

18 Compartment

Wall Mounted Tool Cabinets

Optimise your storage area by using the walls. Pre-punched for wall fixing, ideal for positions above benching or machinery. Fully welded construction. Available in two sizes. 75mm high simple steel drawer units with integral handle. Espagnolette two point locking with flush fitting handle. Adjustable shelves.
Finished in epoxy powder coat - grey/blue.

For drawers 1050 x 750mm (W x D)

18 Compartment

Engineers Workbenches

Available with the following worktop finishes.
Wisa - Laminated ply core with mid grey polypropylene face. An easy clean top with good resistance to oil, grease, mild alkalis and weak acids.
Mfc - Particle board core with light grey laminate face. A light duty easy clean top suitable for assembly or office environments.
Mpx - Laminated beech ply. A tough, general duty top suitable for most applications.

Framework bench

A tough steel section framework, braced and finished in RAL7035 grey epoxy powder coat.
The 30mm worktop is available in multiplex or wisa. Full range of accessories available, including overhead kits and suspended cabinets. Flat packed for self assembly.
Height: 780mm.

Perfo Storage Accessories

The accessories are quickly secured to our Perfo panels with our Perfolock and may be repositioned at any time. All items are manufactured from steel and are zinc plated to give a long, corrosion-resistant life. The standard kits provide easy selection and ordering for Perfo accessories. For custom layouts choose from our range of Perfo accessories. Securely fastened to panels in seconds with Perfolock clips. Remove or reposition as required. Hook ends capped for safety.

Double Spring Clips (Pack of 5)

Storage Cupboards

General storage cupboards with 50kg UDL capacity per shelf. All shelves adjustable on 25mm pitch. 1m or 2m high, 550mm deep, 750 or 1000mm wide, 2 point locking mechanism.

Drawer Divider Kits

Customise your storage system with a high quality range of drawer division accessories. Steel variable divider kits
manufactured from galvanised sheet steel or plastic box kits in RAL7011 impact resistant polystyrol.

For drawers 650 x 650mm (W xD)

21 Compartment

Louvred Cupboards

These heavy duty cupboards provide a strong and secure component store. The back panel and inner doors are louvred to accept plastic bins. The cupboard is offered empty or as standard kits complete with bins as shown.
Dimensions (W x D x H): 1000 x 600 x 2000mm.

Louvred Cupboard (no contents)