产品 / 工装夹具
编号：KEN4960050K
●产品描述：
Kennedy® Abrasive Wheel Dressers
Conventional abrasive wheels need truing and regularly dressing to maintain a quality grinding performance, Kennedy single point diamond dressing tools have a single industrial diamond embedded in a cylindrical steel shaft they are suitable for performing both of these applications:
Truing is the process of aligning the periphery of the grinding wheel so that it runs concentric with its axis of rotation. This allows accurate and precise relative motion between the grinding wheel and the part being ground.
Dressing removes dulled abrasive and foreign material that has been embedded into the wheel. This allows the wheel to cut properly. Kennedy diamond dressing tools are mainly used to true straight-faced grinding wheels.
Single-Point Diamond Dressing Tool
Available with in a range of Diamond Carats, all with 13x150mm (1/2”x6”) Diameter x Length steel shafts:
0.50 Carat Order Code: KEN-496-0050K.
0.75 Carat Order Code: KEN-496-0070K.
1.00 Carat Order Code: KEN-496-0100K.
1.50 Carat Order Code: KEN-496-0150K.
2.00 Carat Order Code: KEN-496-0200K.
编号：KEN4951010K
●产品描述：
Kennedy® Huntington Type Dressers Replacement Wheel Sets
Replacement dressing wheels for Kennedy Huntington wheel dressers.
编号：KEN4824340K
●产品描述：
Kennedy® Morse Taper Tooling
A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.
Extension Sockets
编号：KEN4906890K
●产品描述：
Kennedy® Serrated Hard Jaws
To suit Kitagawa serrated power chucks.
3 Jaw Sets
编号：KEN4214680K
●产品描述：
Kennedy® Industrial Key Steel
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.
Rectangular - Inch
编号：KEN4822140K
●产品描述：
Kennedy® Morse Taper Tooling
A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.
Drill Sleeves
编号：KEN4825120K
●产品描述：
Kennedy® Morse Taper Tooling
A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.
Turret Sockets
编号：KEN4213160K
●产品描述：
Kennedy® Industrial Key Steel
High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.
Square - Inch
编号：KEN5890300K
●产品描述：
Fibre Grips
Fibre-faced aluminium vice jaws for use with copper, aluminium, brass and wooden workpieces to prevent marking of work surface. Supplied in pairs.
编号：KEN4825360K
●产品描述：
Kennedy® Morse Taper Tooling
A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.
Turret Sockets