产品 / 工装夹具
编号：KEN4429000K
●产品描述：
Kennedy® SDS Drill Chuck Adaptor 1/2" x 20TPI
The Kennedy® SDS Drill Chuck Adaptor enables you to hold conventional shank drill bits for use in any SDS rotary drill. With a 10mm dia SDS fitting at one end and a 1/2"x20 UNF threaded Drill chuck connection at the other, once fitted to a suitable chuck the arbor allows rapid and secure tool changing of conventional and SDS bits. Complete with M6 left hand thread countersunk retaining screw to fix securely inside your chuck and hexagon flange for extra torque when fitting. Not recommended while hammer action is in use, suitable for rotary mode only. 75mm overall length.
编号：KEN4429120K
●产品描述：
Kennedy® Industrial Drill Chuck Arbors
Precision machined, fully hardened & ground to give maximum surface contact.
Morse Taper Drive to Jacobs Taper
编号：KEN4421380K
●产品描述：
Kennedy® Industrial Drill Chuck Arbors
Precision machined, fully hardened & ground to give maximum surface contact.
Morse Taper Drive to Threaded
编号：KEN4429240K
●产品描述：
Kennedy® Industrial Drill Chuck Arbors
Precision machined, fully hardened & ground to give maximum surface contact.
Morse Taper Drive to Jacobs Taper
编号：KEN4425320K
●产品描述：
Kennedy® Industrial Drill Chuck Arbors
Precision machined, fully hardened & ground to give maximum surface contact.
KD Type - Morse Taper Shank to Din Taper Arbors
Fully hardened and ground Morse Taper to DIN 228.
Chuck taper to DIN 238.
编号：KEN4429220K
●产品描述：
Kennedy® Industrial Drill Chuck Arbors
Precision machined, fully hardened & ground to give maximum surface contact.
Morse Taper Drive to Jacobs Taper
编号：KEN4422120K
●产品描述：
Kennedy® Industrial Drill Chuck Arbors
Precision machined, fully hardened & ground to give maximum surface contact.
Morse Taper Drive to Threaded
编号：KEN4425260K
●产品描述：
Kennedy® Industrial Drill Chuck Arbors
Precision machined, fully hardened & ground to give maximum surface contact.
KD Type - Morse Taper Shank to Din Taper Arbors
Fully hardened and ground Morse Taper to DIN 228.
Chuck taper to DIN 238.
编号：KEN4425360K
●产品描述：
Kennedy® Industrial Drill Chuck Arbors
Precision machined, fully hardened & ground to give maximum surface contact.
KD Type - Morse Taper Shank to Din Taper Arbors
Fully hardened and ground Morse Taper to DIN 228.
Chuck taper to DIN 238.
编号：KEN4423580K
●产品描述：
Kennedy® Industrial Drill Chuck Arbors
Precision machined, fully hardened & ground to give maximum surface contact.
Morse Taper Drive to Threaded