Aluminium Tig/Gas Welding Rods

Sifalumin No.15 - 5% Silicon
BS 2901 : Part 4 : 1990 4043A. (Tig rods). AWS A/SFA 5-10-88: ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys (not magnesium alloys). Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Spares for Speedglas 9100 Auto Welding Helmets

Spare Speedglas Welding Helmet Lenses

Spare Speedglas Welding Helmet Lenses

Flowmeter Argon Regulator

This flowmeter is ideal for TIG use. 0 - 14 lpm. Just adjust the valve and the ball will hover against the required litres per min measurement mark.

Heavy Duty Swaged Welding Nozzles

For use with heavy duty shank.

Aluminium Tig/Gas Welding Rods

BS 2901 : Part 2 : 1990 18/8/3 Mo - 316L AWS A/SFA 5-9-93.
Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Sifsteel Stainless 316L

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. Including 1144, 1143, 2010, Saffire 5, 4, 3, NM250, NM400, Citogas HDT200, NMC200. Size 13 suitable for Saffire 4 and 3 only.

Available in 13mm (126809) and 19mm (126810).

A-GNM Gouging Nozzles

3M 428010 Speedglas X Inner Protection Plates x 5

Suitable for 3M Speedglas 9100 Auto Welding Helmets

SWP Drying Ovens

SWP drying ovens - the efficiency of welding electrodes can be seriously impaired if the electrode coating is exposed to a damp environment. Dampness can cause water to be generated in the arc shield, which could adversely effect the running quality of the electrode by promoting excessive spatter and ultimately the quality of the weld by creating porosity and piping. SWP offer you a range of drying ovens to suit many locations and needs.

1141 Dual Voltage 110/240V Electrode Quiver

The heated electrode quiver is designed for use on installations with a 110 volt or 240 volt supply (3 models available: 110V, 240V and Dual 110/240V). The quiver will maintain an even temperature of 100C approx. dependent on the amount of electrodes stored.
Voltage: 110, 240V or Dual 110/240V.
Load: 150W.
Overall dimensions:
(W x D x H)
120 x 500 x 110mm.

Oven capacity: 9kg.
Oven weight: 3kg.

Kennedy Gas Lens Heatshield

54N01

160A MMA Inverter Welder

The GYSMI 165 is a revolutionary product with unmatched welding characteristics not only for basic electrodes but also for the rutiles, stainless steel and cast iron electrodes. Inverter technology welding unit with microprocessor control. Tactile keyboard and digital display.



MMA : the product arc dynamic is revolutionary and
unique on the market. Basic electrodes no longer
cause trouble. This product does not only integrate
Arc Force and Anti Sticking functionality but it is also
the only single phase welding unit on the market to
offer an adjustable Hot Start for all types of electrodes.

Tig - LIFT ARC : With its microcontroller, the starting
in Tig mode is very easy.

The product is protected to function on generators and
against supply voltage variations (/- 15%).

Endowed with an index of protection IP23, the product
is particularly suited for outdoor works.

Given its very high duty cycle on high intensity, it is
recommended to plug it on a 16A plug with delayed
fuse, or to adapt it to a more powerful plug.

The product is complete with accessories: earth
cables and electrode holder.

MMA electrodes: 1.6 - 4.0mm.
Single phase: 230V(DC).
Fuse rating: 16A.
Output current range: 10A - 160A.