Saffire Regulators

With twin bulk head gauges clearly displaying cylinder pressure and flow rate. Comply with EN ISO 2503.
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.

Series 2 Multi-Stage Regulators

Twin-chambered to deliver constant pressure - even when cylinder is near empty. Citogas Regulators
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.

Murex Mig Accessories

For torch type MXE 20-30.

Gas Diffuser

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. For use with blowpipes* 1143, 1144; Saffire NM250; Citogas NMC200. Up to 766,000 Btu/h can be achieved from 5H when used on blowpipe with adaptor. *Use adaptor 120458.

Available in a choice of:
1H (72-163Btu/h [1000s])
2H (102-188Btu/h [1000s])
3H (183-361Btu/h [1000s])
4H (236-401Btu/h [1000s])
5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H

Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.

Saffire Indicator Type Regulators

Gaugeless - with indicator to signal empty cylinder.

Series 1 Single Stage

Welding Helmet & Respirator

The Origo? Tech 9-13 helmet features comfort headgear, whilst the lightweight shell offers superior face, head, ear & neck protection, which allows for all position welding.
Variable shade ADF uses the latests technology and has proven reliabilty. The ADF is screw retianed and sits in a fully moulded light seal cradle, which also creates a slight convex curve on the front spatter lens for extra security and strength. Fully assembled and ready to use.
The Origo? Air powered respiratory unit has been designed to fit the Origo? Tech welding helmets.
The unit provides clean, filtered air to increase the comfort and safety for the welder.
The Origo? Air is delivered complete with an 8-hour battery, P3 filter, comfort pad, waist belt and an air hose with a Proban hose cover fitted. The unit is supplied with an inteligent charger, which will ensure a prolonged life time of the battery, by reducing the risk of over charging. Also equipped with a low flow alarm, which will give audible signal when the filter is blocked, or the battery is running low.

Origo? Tech & Origo? Air Combination

Murex Mig Spares

For torch compatibility please refer to our catalogue.

Contact Tips

Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.

Saffire Regulators

With twin bulk head gauges clearly displaying cylinder pressure and flow rate. Comply with EN ISO 2503.
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.

Series 2 Multi-Stage Regulators

Twin-chambered to deliver constant pressure - even when cylinder is near empty. Citogas Regulators
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.

Murex All Positional Welding Electrodes

One of the most versatile electrodes available, suitable for Vertical, Overhead and Downhand welding. Available in 2.5, 3.2, 4.0, 5.0 and 6mm.

Vodex 6013

High quality rutile coated, all positional rods. Applications: for steel plate and strip including structural steels and pipe work, especially under site conditions.
N.B. suitable for AC (50V minimum open circuit) and DC plus/minus.