Saffire Indicator Type Regulators

Gaugeless - with indicator to signal empty cylinder.

Series 1 Single Stage

Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.

Murex Mig Accessories

Long, Tapered and Parallel nozzles available.

Nozzles

Electrodes for Mild Steels

Arc welding rods for mild steel and medium tensile steels.

Satinex

Medium rutile coated, all positional rods. For light to medium fabrication work.
Applications: for steel plate and strip including structural steels.
NB suitable for AC (50V minimum open cicuit) and DC+/-

Saffire NM250 Cutting Blowpipe

For general workshop cutting up to 250mm (10?). For use with ANM/PNM nozzles below. Nozzle mixing and backfire resistant, 90 head with improved control knobs for positive flame setting.

Murex LW1 MIG Wire Reels

Precision layer wound for snag free production. Gas shielded, deposits C - 1.3% Mn weld metal for mild and medium tensile steels. Copper coated, double deoxidised with manganese and silicon with good mechanical properties. For use with CO2 and AR-CO2. For welding mild steel and C-Mn steels. Available in 0.8mm (15kg drum), 1.0mm and 1.2mm (18kg drums). Made to BS 2901/1 : 1983 A18 & BS EN 440 G3 Si1.

LW1 Mig Wire Reel

Murex Saffire 5 Heavy Duty Welding Shank

Heavy duty welding between 1 to 25mm and acetylene cutting to 200mm. For a wide range of oxygen fuel gas processes, using appropriate accessories such as welding mixer and nozzles or with cutting attachment. Made to EN ISO 5172.

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks. Including 1144, Saffire 5, 4, 3, Citogas HDT200. Sizes 50 and 100 require A-HT mixer 143525.

Available in a choice of:
126134 A-HT 25 (52Btu/h [1000s])
126135 A-HT 50 (91Btu/h [1000s])
126136 A-HT 100 (139Btu/h [1000s])

Acetylene Heating Nozzles - A-HT

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. For use with blowpipes* 1143, 1144; Saffire NM250; Citogas NMC200. Up to 766,000 Btu/h can be achieved from 5H when used on blowpipe with adaptor. *Use adaptor 120458.

Available in a choice of:
1H (72-163Btu/h [1000s])
2H (102-188Btu/h [1000s])
3H (183-361Btu/h [1000s])
4H (236-401Btu/h [1000s])
5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H