Electrodes for Mild Steels

Arc welding rods for mild steel and medium tensile steels.

Satinex

Medium rutile coated, all positional rods. For light to medium fabrication work.
Applications: for steel plate and strip including structural steels.
NB suitable for AC (50V minimum open cicuit) and DC+/-

Saffire Regulators

With twin bulk head gauges clearly displaying cylinder pressure and flow rate. Comply with EN ISO 2503.
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.
ArC-35L Argon type is suitable for inert gases eg for use with Mig or Tig welders.

Series 1 Single Stage

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Murex LW1 MIG Wire Reels

Precision layer wound for snag free production. Gas shielded, deposits C - 1.3% Mn weld metal for mild and medium tensile steels. Copper coated, double deoxidised with manganese and silicon with good mechanical properties. For use with CO2 and AR-CO2. For welding mild steel and C-Mn steels. Available in 0.8mm (15kg drum), 1.0mm and 1.2mm (18kg drums). Made to BS 2901/1 : 1983 A18 & BS EN 440 G3 Si1.

LW1 Mig Wire Reel

Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.

Murex Saffire No.5 Welding, Cutting & Heating Set

Contents: Saffire 5 shank. Acetylene welding mixer. 6 swaged welding nozzles (sizes 2, 5, 7, 10, 13 & 25). Cutting attachment, 2 ANM cutting nozzles (sizes 3/64", 1/16"), AHT 25 heating neck and tip. '0' rings. Spark lighter with 9 flints. Nozzle cleaners. Carrying case. Welding capacity up to 8mm. Cutting capacity up to 75mm.

Saffire No.5 Welding, Cutting & Heating Set

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Aluminium Tig/Gas Welding Rods

Saffire aluminium 5% silicon & magnesium. BS 2901:Part 4 : 1990 4043A (Tig Rods). BS 1453:1972(1987) 4043A (Gas Rods) AWS A/SFA 5-10-88:ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys containing up to 5% magnesium. Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.