Murex Mig Accessories

Long, Tapered and Parallel nozzles available.

Nozzles

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Electrodes for Stainless Steels

For welding 316 and 316L stainless steels. Available in 1.6, 2, 2.5, 3.2 and 4mm.

Nicrex E316L

For welding 316L austenitic steels.
Nicrex E316L
Extra low carbon, acid-rutile coated electrodes for 316 and 316L austenitic stainless steels. Applications: for stainless plate structural steels, pipe work and vessels. Ideal for food industry, chemical, pharmaceutical and processing plant fabrications.
N.B. Suitable for AC (50V minimum open circuit) and DC.

Aluminium Tig/Gas Welding Rods

Saffire aluminium 5% silicon & magnesium. BS 2901:Part 4 : 1990 4043A (Tig Rods). BS 1453:1972(1987) 4043A (Gas Rods) AWS A/SFA 5-10-88:ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys containing up to 5% magnesium. Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Murex Process/Heating Nozzles and Adaptors

200mm neck for acetylene nozzles.

Heating Neck

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. For use with blowpipes* 1143, 1144; Saffire NM250; Citogas NMC200. Up to 766,000 Btu/h can be achieved from 5H when used on blowpipe with adaptor. *Use adaptor 120458.

Available in a choice of:
1H (72-163Btu/h [1000s])
2H (102-188Btu/h [1000s])
3H (183-361Btu/h [1000s])
4H (236-401Btu/h [1000s])
5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H

Portable MIG/MAG Welding Unit

Used for MIG/MAG welding of mild steels for repair, maintenance and assembly work. This easy to use and powerful unit, offers excellent welding properties and is easy to take along to the job at hand. The performance of this unit makes it a superb choice for mild steel welding applications. Perfect for tradesmen working with repair, maintenance or assembly work in the workshop, outdoors or at different sites. Single phase mains connection makes it easy to find a electricity supply. Works equally as well when powered by a portable generator.
Standards IEC/EN 60974-1, EN 60974-05, EN 60974-10
Maximum welding output: 160 Amps
Permitted load, at 40oC:
35% duty cycle, 150/20.5A/V
100% duty cycle, 100/19A/V
Setting range: 30-160A
Open circuit voltage: 60V
Wire feed speed: 2 ? 11m/min
Max. size of the wire reel: 200mm, 5kg
Open circuit power: 15W
Dimensions (LxWxH): 449x198x347mm
Weight with torch & cables: 11.4kg

Caddy Mig C160i

Murex Mig Spares

For torch compatibility please refer to our catalogue.

Contact Tips

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Welders' Helmets

All models have UK size lens aperture (4 1/4" x 3 1/4"). Lenses supplied separately. SF11 Fibre Glass - Traditional short shell type. SF16 Fibre Glass - Long shell type for extra neck and chest protection, suitable for overhead welding. SF8 Thermo-Plastic - Lightweight. Eclipse Polyester/Fibre Glass - Combines excellent strength with high temperature resistance and lightweight.