Murex Masterpak Oxy-Acetylene Welding & Cutting Kits

Murex Masterpak cutting and welding kits - one for oxy-propane cutting, one for oxy-acetylene cutting and one combined oxy-acetylene welding/cutting pack. The kits are ideal for construction workers and civil engineers looking for a complete outfit for all maintenance, repair and demolition work. For complete oxy-acetylene welding and cutting capability. If welding capability is not required, users may specify either the oxy-propane cutting kit or the oxy-acetylene version. Again, both these Masterpaks include the renowned Saffire NM 250 Cutter, regulators and flashback arrestors with their inherent levels of safety and performance.

Oxy-Acetylene Welding & Cutting Kit (1300006)

Kit contents:
Saffire 5 shank,
mixer and cutting attachment,
oxygen and acetylene 2 gauge Saffire series 1ec regulators,
XL5 flashback arrestors,
premium 10m x 6.3mm factory fitted with HCV,
swaged nozzles 2,5,10 ANM 1/16 cutting nozzle,
combination spanner and spark lighter.

Gas & Tig Welding Rods

General purpose steel rod for high grade oxy-acetylene welding of mild steel and wrought iron. Widely used for automobile, heating and ventilation. No flux required. Melts at 1490C.

Saffire Copper Coated Mild Steel

Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.

Murex Mig Accessories

Long, Tapered and Parallel nozzles available.

Nozzles

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. For use with blowpipes* 1143, 1144; Saffire NM250; Citogas NMC200. Up to 766,000 Btu/h can be achieved from 5H when used on blowpipe with adaptor. *Use adaptor 120458.

Available in a choice of:
1H (72-163Btu/h [1000s])
2H (102-188Btu/h [1000s])
3H (183-361Btu/h [1000s])
4H (236-401Btu/h [1000s])
5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H

Murex Masterpak Oxy-Acetylene Welding & Cutting Kits

Murex Masterpak cutting and welding kits - one for oxy-propane cutting, one for oxy-acetylene cutting and one combined oxy-acetylene welding/cutting pack. The kits are ideal for construction workers and civil engineers looking for a complete outfit for all maintenance, repair and demolition work. For complete oxy-acetylene welding and cutting capability. If welding capability is not required, users may specify either the oxy-propane cutting kit or the oxy-acetylene version. Again, both these Masterpaks include the renowned Saffire NM 250 Cutter, regulators and flashback arrestors with their inherent levels of safety and performance.

Oxy-Acetylene Cutting Kit (1300005)

Kit contents:
NM cutting torch,
oxygen and acetylene plugged regulators,
XL5 flashback arrestors,
premium hose 10m x 10mm factory fitted with HCV,
ANM 1/16 and 1/8 cutting nozzles,
combination spanner and spark lighter.

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Stainless Steel Welding Rods

All rods 1m long. (All weights approximate.)

Saffire 18/8/3 Mo - 316L AWS A/SFA 5-9-93. ER316L. EN12072. W19123L.

Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.