ProtectoXtract Mobile Fume Extractor

A mobile ‘plug-and-play’, high-vacuum extraction solution for filtration of particulate fumes, dusts and some gases. The particles or gases are extracted from the airflow during a filtering procedure consisting of several stages and the cleaned air is returned to the working space. Available in 230V or 110V input power supply models. ProtectoXtract is provided with a 3m positional cantilever arm and canopy, designed for use in a welding bay, workshop or garage. The choice of 230V or 110V models provides the possibility for use in a range of environments. However, the ProtectoXtract should not be used for filtering fumes containing oil, solvents, explosive dusts/gases or hybrid mixtures of wastes, etc. ProtectoXtract includes a 4-step filtration system, with four replaceable filters (1x outer ‘gross’ filter; 1x pre-filter; 1x main filter and 1x activated carbon filter).
An optional spark arrestor filter is available separately. Bags for safely disposing of filters when changing them are also available. ProtectoXtract is BGIA-certified and compliant with DIN EN ISO 15012-1, so is suitable for ‘category W3' stainless welding fumes (>30% Ni+Cr).
Extraction capacity:
115V : 1600 m3/hr @ 1800pa 100%,
230V : 1600 m3/hr @ 1800pa 100%.
Filter efficiency: >99%.
Motor power: 1.1kW.
Noise level: 72dB(A).
Weight: 80kg (without arm).
Dimensions: 58 x 58 x 90cm.
IP Rating/ISO class: IP 54/F.

ProtectoXtract Mobile Fume Extractor

A mobile ‘plug-and-play’, high-vacuum extraction solution for filtration of particulate fumes, dusts and some gases. The particles or gases are extracted from the airflow during a filtering procedure consisting of several stages and the cleaned air is returned to the working space. Available in 230V or 110V input power supply models. ProtectoXtract is provided with a 3m positional cantilever arm and canopy, designed for use in a welding bay, workshop or garage. The choice of 230V or 110V models provides the possibility for use in a range of environments. However, the ProtectoXtract should not be used for filtering fumes containing oil, solvents, explosive dusts/gases or hybrid mixtures of wastes, etc. ProtectoXtract includes a 4-step filtration system, with four replaceable filters (1x outer ‘gross’ filter; 1x pre-filter; 1x main filter and 1x activated carbon filter).
An optional spark arrestor filter is available separately. Bags for safely disposing of filters when changing them are also available. ProtectoXtract is BGIA-certified and compliant with DIN EN ISO 15012-1, so is suitable for ‘category W3' stainless welding fumes (>30% Ni+Cr).
Extraction capacity:
115V : 1600 m3/hr @ 1800pa 100%,
230V : 1600 m3/hr @ 1800pa 100%.
Filter efficiency: >99%.
Motor power: 1.1kW.
Noise level: 72dB(A).
Weight: 80kg (without arm).
Dimensions: 58 x 58 x 90cm.
IP Rating/ISO class: IP 54/F.

Gas & Tig Welding Rods

General purpose steel rod for high grade oxy-acetylene welding steel and wrought iron. Widely used for automobile, heating and ventilation industries. No Flux required. Melts at 1490C.

Sifsteel No.11 Copper Coated Mild Steel - BS1453 A1

Aluminium Tig/Gas Welding Rods

Sifalumin No.15 - 5% Silicon
BS 2901 : Part 4 : 1990 4043A. (Tig rods). AWS A/SFA 5-10-88: ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys (not magnesium alloys). Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Aluminium Tig/Gas Welding Rods

BS 2901 : Part 2 : 1990 18/8/3 Mo - 316L AWS A/SFA 5-9-93.
Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Sifsteel Stainless 308L

Aluminium Tig/Gas Welding Rods

Sifalumin No.15 - 5% Silicon
BS 2901 : Part 4 : 1990 4043A. (Tig rods). AWS A/SFA 5-10-88: ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys (not magnesium alloys). Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Aluminium Tig/Gas Welding Rods

BS 2901 : Part 2 : 1990 18/8/3 Mo - 316L AWS A/SFA 5-9-93.
Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Sifsteel Stainless 316L

Sif Aluminium Mig Wire Reels

For use with Ar or Ar-He shielding gas. Precision layer wound. Made to BS 2901/1 : 1983 5356 & AWS A5.10.92 ER 5356. For plate, pipe tube, forgings and cast alloys with up to 5% magnesium content and for welding dissimilar aluminium grades. Available as 1.0mm and 1.2mm. 6.5kg reels.

SifMig 5356 Aluminium Mig Wire Reel

Gas & Tig Welding Rods

General purpose brazing or bronze welding rod. Suitable for brazing and bronze-welding of sheet, tube and extruded sections in all types of fabrication work, involving steel, cast iron, copper and its alloys.

Sifbronze No.1 - BS1845 CZ6 1453 C2

Gas & Tig Welding Rods

General purpose brazing or bronze welding rod. Suitable for brazing and bronze-welding of sheet, tube and extruded sections in all types of fabrication work, involving steel, cast iron, copper and its alloys.

Sifbronze No.1 - BS1845 CZ6 1453 C2