ProtectoXtract Mobile Fume Extractor

A mobile ‘plug-and-play’, high-vacuum extraction solution for filtration of particulate fumes, dusts and some gases. The particles or gases are extracted from the airflow during a filtering procedure consisting of several stages and the cleaned air is returned to the working space. Available in 230V or 110V input power supply models. ProtectoXtract is provided with a 3m positional cantilever arm and canopy, designed for use in a welding bay, workshop or garage. The choice of 230V or 110V models provides the possibility for use in a range of environments. However, the ProtectoXtract should not be used for filtering fumes containing oil, solvents, explosive dusts/gases or hybrid mixtures of wastes, etc. ProtectoXtract includes a 4-step filtration system, with four replaceable filters (1x outer ‘gross’ filter; 1x pre-filter; 1x main filter and 1x activated carbon filter).
An optional spark arrestor filter is available separately. Bags for safely disposing of filters when changing them are also available. ProtectoXtract is BGIA-certified and compliant with DIN EN ISO 15012-1, so is suitable for ‘category W3' stainless welding fumes (>30% Ni+Cr).
Extraction capacity:
115V : 1600 m3/hr @ 1800pa 100%,
230V : 1600 m3/hr @ 1800pa 100%.
Filter efficiency: >99%.
Motor power: 1.1kW.
Noise level: 72dB(A).
Weight: 80kg (without arm).
Dimensions: 58 x 58 x 90cm.
IP Rating/ISO class: IP 54/F.

Sifredicote No.1 - BS1845 & BS1453 C2

General purpose brazing or bronze welding with extended full flux coating. For brazing copper and steel. Melts at 875C.

Gas & Tig Welding Rods

General purpose steel rod for high grade oxy-acetylene welding steel and wrought iron. Widely used for automobile, heating and ventilation industries. No Flux required. Melts at 1490C.

Sifsteel No.11 Copper Coated Mild Steel - BS1453 A1

Gas & Tig Welding Rods

Copper coated triple deoxidised mild steel rod for Tig welding pipework etc. Particularly suited to Tig welding (with argon shielding gas) root runs in pipes. Can be used without flux for oxy-acetylene welding. Typical all-weld metal ultimate tensile strength 630N/mm2.

Sifsteel A15 - BS2901 AWS ER:705-2.

Aluminium Tig/Gas Welding Rods

BS 2901 : Part 2 : 1990 18/8/3 Mo - 316L AWS A/SFA 5-9-93.
Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Sifsteel Stainless 316L

Aluminium Tig/Gas Welding Rods

Sifalumin No.15 - 5% Silicon
BS 2901 : Part 4 : 1990 4043A. (Tig rods). AWS A/SFA 5-10-88: ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys (not magnesium alloys). Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Gas & Tig Welding Rods

General purpose steel rod for high grade oxy-acetylene welding steel and wrought iron. Widely used for automobile, heating and ventilation industries. No Flux required. Melts at 1490C.

Sifsteel No.11 Copper Coated Mild Steel - BS1453 A1

Sif Aluminium Mig Wire Reels

For use with Ar or Ar-He shielding gas. Precision layer wound. Made to BS 2901/1 : 1983 4043A & AWS A5.10.92 ER 4043. For wrought and cast alloys with up to 7% silicon content. Available as 1.0mm and 1.2mm. 6.5kg reels.

SifMig 4043 Aluminium Mig Wire Reel

Aluminium Tig/Gas Welding Rods

BS 2901 : Part 2 : 1990 18/8/3 Mo - 316L AWS A/SFA 5-9-93.
Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Sifsteel Stainless 316L

Gas & Tig Welding Rods

General purpose steel rod for high grade oxy-acetylene welding steel and wrought iron. Widely used for automobile, heating and ventilation industries. No Flux required. Melts at 1490C.

Sifsteel No.11 Copper Coated Mild Steel - BS1453 A1