Oerlikon DC Inverter Miniarc 4.0i

230V single phase DC inverter for welding steels, stainless steels with rutile, basic and special stick electrodes up to 4.0mm diameter. Output current of 150amps 25% duty cycle. The Miniarc 4.0i is a highly portable machine weighing 3.8kg providing an amperage range of 2 - 150A capable of using electrodes in the range 1.6 - 4.0mm. Operating features include: 'arc force' function to provide a stable arc condition, integral 'hot start' for easy striking and 'antistick' device to eliminate short circuiting of the electrode.

IP23 protection suitable for outdoor use.
European Standards: EN 60974.1/EN 60974.10.
30V single phase DC Inverter.
Fully portable.
1.6mm - 4.0mm electrode capacity.
"Hot Start" for easy striking.
Welds steels, stainless steels with rutile, basic and special stick electrodes.
Effective primary consumption: 16A.
Maximum primary consumption: 31A.
No load voltage: 85V.
Current range: 5A - 150A.
Duty cycle 40C: 100% - 100A, 60% - 120A, 25% - 150A.
Protection class: IP 23.
Insulation class: H.

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Fincord 6013

Heavy rutile coated electrode suitable for downhand butt and fillet welding. Superb finish with self releasing slag. Applications: For steel plate and strip including structural steels.

Overcord Z E6013 Rutile Electrode

Oerlikon Overcord Z is a new E6013 rutile MMA electrode, it is designed for all positional welding including vertical up and down (it replaces Supercord). Overcord Z is manufactured with a rutile/cellulosic flux coating, which gives a fast freezing slag to enable vertical down welding. Overcord Z offers easy striking with improved stable operating characteristics resulting in excellent weld bead shape and appearance.

Conforms to:
AWS A5.1-91 - E6013
EN499: 1994 E38 0 RC 11

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Supercito 7010S ('Low Hydrogen')

Basic coated, all positional rods. Applications: for steel plate structural steels, pipe work and forgings. Ideal for repairs of casting and machinery, compensates for dilution effect of poor steels. Often used where rutile deposits may be at risk from cracking.
N.B. Suitable for AC (70V minimum open circuit) and DC. Optimum rooting operability is obtained using DC-.

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Fincord M 6013

Medium rutile coated, all positional rods. Minimum spatter. Applications: For steel plate and strip including strutural steels.

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Fincord M 6013

Medium rutile coated, all positional rods. Minimum spatter. Applications: For steel plate and strip including strutural steels.

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Fincord M 6013

Medium rutile coated, all positional rods. Minimum spatter. Applications: For steel plate and strip including strutural steels.

Oerlikon ROKCY 'Ready to Weld' Kit

For Oerlikon ROKCY AC Transformers 3.2, 4.0 and 5.0.

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Fincord 6013

Heavy rutile coated electrode suitable for downhand butt and fillet welding. Superb finish with self releasing slag. Applications: For steel plate and strip including structural steels.

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Fincord M 6013

Medium rutile coated, all positional rods. Minimum spatter. Applications: For steel plate and strip including strutural steels.