Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Supercito 7010S ('Low Hydrogen')

Basic coated, all positional rods. Applications: for steel plate structural steels, pipe work and forgings. Ideal for repairs of casting and machinery, compensates for dilution effect of poor steels. Often used where rutile deposits may be at risk from cracking.
N.B. Suitable for AC (70V minimum open circuit) and DC. Optimum rooting operability is obtained using DC-.

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Fincord M 6013

Medium rutile coated, all positional rods. Minimum spatter. Applications: For steel plate and strip including strutural steels.

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Supercito 7010S ('Low Hydrogen')

Basic coated, all positional rods. Applications: for steel plate structural steels, pipe work and forgings. Ideal for repairs of casting and machinery, compensates for dilution effect of poor steels. Often used where rutile deposits may be at risk from cracking.
N.B. Suitable for AC (70V minimum open circuit) and DC. Optimum rooting operability is obtained using DC-.

Oerlikon Carbofil 1 MIG Wire Reels

Precision layer wound, for snag free production welding. Mild steel Mig wire on plastic reels. For mild and medium tensile steels. Copper coated, double deoxidised with manganese and silicon providing high quality welds with good mechanical properties. Made to BS2901 PART 1, 1983 A18. BS EN 440 G3Si1.S. Available in 0.8mm and 1.0mm. 15kg reels.

Carbofil Mig Wire Reel

Oerlikon DC Inverter Miniarc 4.0i

230V single phase DC inverter for welding steels, stainless steels with rutile, basic and special stick electrodes up to 4.0mm diameter. Output current of 150amps 25% duty cycle. The Miniarc 4.0i is a highly portable machine weighing 3.8kg providing an amperage range of 2 - 150A capable of using electrodes in the range 1.6 - 4.0mm. Operating features include: 'arc force' function to provide a stable arc condition, integral 'hot start' for easy striking and 'antistick' device to eliminate short circuiting of the electrode.

IP23 protection suitable for outdoor use.
European Standards: EN 60974.1/EN 60974.10.
30V single phase DC Inverter.
Fully portable.
1.6mm - 4.0mm electrode capacity.
"Hot Start" for easy striking.
Welds steels, stainless steels with rutile, basic and special stick electrodes.
Effective primary consumption: 16A.
Maximum primary consumption: 31A.
No load voltage: 85V.
Current range: 5A - 150A.
Duty cycle 40C: 100% - 100A, 60% - 120A, 25% - 150A.
Protection class: IP 23.
Insulation class: H.

Oerlikon AC Transformer ROKCY

Handy and fully portable AC transformer available in three versions and offers very stable ADC welding characteristics ideal for small workshops, maintenance, agricultural and repair applications. Suitable for both 230V and 400V supply, the ROKCY is capable of depositing mild steel, stainless steel and hardfacing electrodes in the range 1.6 - 5.0mm depending on model.

Fully portable.
Suitable for 230V and 400V supply.
Up to 215A current.
Deposits mildsteel, stainless steel and hardfacing electrodes.
Optional ROKCY 'Ready to Weld' kit, suits all light industrial and fabrication applications.
Kit contains electrode holder and earth return assemblies.

Oerlikon ROKCY 'Ready to Weld' Kit

For Oerlikon ROKCY AC Transformers 3.2, 4.0 and 5.0.

Oerlikon AC Transformer ROKCY

Handy and fully portable AC transformer available in three versions and offers very stable ADC welding characteristics ideal for small workshops, maintenance, agricultural and repair applications. Suitable for both 230V and 400V supply, the ROKCY is capable of depositing mild steel, stainless steel and hardfacing electrodes in the range 1.6 - 5.0mm depending on model.

Fully portable.
Suitable for 230V and 400V supply.
Up to 215A current.
Deposits mildsteel, stainless steel and hardfacing electrodes.
Optional ROKCY 'Ready to Weld' kit, suits all light industrial and fabrication applications.
Kit contains electrode holder and earth return assemblies.

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Fincord M 6013

Medium rutile coated, all positional rods. Minimum spatter. Applications: For steel plate and strip including strutural steels.

Electrodes for Mild Steels

Arc welding rods for mild and medium tensile steels

Supercito 7010S ('Low Hydrogen')

Basic coated, all positional rods. Applications: for steel plate structural steels, pipe work and forgings. Ideal for repairs of casting and machinery, compensates for dilution effect of poor steels. Often used where rutile deposits may be at risk from cracking.
N.B. Suitable for AC (70V minimum open circuit) and DC. Optimum rooting operability is obtained using DC-.