Smarty TX160Alu

Heavy-duty single-phase inverter AC/DC T.I.G. / M.M.A. machine, for general-purpose use. Features include robust ABS plastic case to protect from accidental damage, T.I.G. pulsing on DC, wave balance and frequency control on AC, H.F. start, slope out, 2/4 latching, remote facility, hot start and Anti stick device. Simple controls for welding cycle control for post gas, down slop and post gas. Ideal for production, maintenance and on site fabrication.
Input Voltage: 240 volt 16amp
Welding Current Range: 5-150amps
Duty Cycle: 120amps @ 60%
Supplied with: TIG Torch, Earth lead, and Regulator
Optional Foot Pedal Available

Puma Power 2000



2000

A heavy duty single phase inverter MMA/scratch start machine
with protection for use with power generators
Welding current range: 5 - 180amps.
Duty cycle @ 60% 140amps.
Weldable electrodes 1.6 - 4.0mm.
Dimensions (L x W x H): 162 x 265 x 385mm.
Weight: 9kg.

CEMONT BLUMIG Professional Separate MIG/MAG Welders

Heavy duty 415 three phase separate wire feed MIG/MAG machine, fitted with a 4 roll heavy duty 4 x 4 wire feed system for accurate wire speed control. Features include Electronic Auto Adjust for ease of set up. This machine is ideal for production, maintenance and fabrication. 415 volt 3 phase.
Features Include:
Electronic Auto Adjust for ease of set up.
2/4 torch latching.
Burn back and slop up control.
415 volt.
2 year warranty.
Supplied with MB36 style 3m torch and regulator.
10M interconnector option and water cooled option avallable on request.

CEMONT BLUMIG 403S Professional Separate MIG/MAG Welder

Large robust casing.
Welding current range: 35-400amps.
30 welding steps.
Wire sizes: 0.6-1.2mm.
Dimensions: 500 x 1180 x 950mm.
Weight: 108kg.
4m or 10m wire feed interconnector link options.

Cemont Portable Professional MMA/Tig Inverter Power Source

Heavy duty single phase inverter MMA/Touch Tig machine, for general purpose use. Features include robust front and rear profiles in tough ABS plastic to protect from accidental damage, hot start and anti-stick device. This machine is ideal for maintenance and on site fabrication.

Specifications:
Welding current range: 5 - 130amps.
Duty cycle: 50%: 125amps.
Weldable electrodes: 1.6 - 3.25mm.
240V single phase.
2 year warranty.
Dimensions (L x W x H): 145 x 235 x 340mm.
Weight: 7.7kg.

Puma S1400 Portable Professional MMA/Tig Inverter Power Source (Replaces S1401)

Cemont BluMig Mig Welders

A range of compact Mig Welders for your choice of applications

BluMig 241C Professional Compact Mig Welder (Replaces Compact 241M).

Professional compact Mig welder with heavy duty four roll feed system with auto adjusting wire speed, slope up and burnback control, welding timer, fan cooling and thermal
protection.
IP22 Class protection.
240V single phase input.
20A fuse rating.
Power input: 8.2kW
Duty cycle: 240A 35%
Welding current range: 40 - 240 amps.
Weight: 52.0kg.
Dimensions:500 x 870 x 950mm.

Cemont Plasma Cutters

The SHARP 10 is a plasma cutter using inverter technology that ensures an excellent regulation of the cutting current, which increases the cutting quality. The digital display ensures better adjustment/control and optimal reading of the cutting parameters, whilst in use. Capable of contact cutting which increases the cutting quality and reduces fume emissions. Easy to transport weighing in at only 8Kg.

SHARP 10 Plasma Cutter

Specification:
Cutting capacity (on carbon steel)
in quality 6mm
in separation 10mm
Input voltage single-phase: 230V - 50/60Hz
Effective consumption: 14A
Compressed air consumption: 100 l/min - 4 bars
Welding current: 10 - 30A
Duty cycle at 40C:
at 35% 30A
at 60% 25A
at 100% 20A
Protection class: IP23
Dimensions: 415 x 150 x 310mm
Weight: 8kg

Supplied complete with:
torch, earth lead and sample consumables.

CEMONT BLUMIG Professional Separate MIG/MAG Welders

Heavy duty 415 three phase separate wire feed MIG/MAG machine, fitted with a 4 roll heavy duty 4 x 4 wire feed system for accurate wire speed control. Features include Electronic Auto Adjust for ease of set up. This machine is ideal for production, maintenance and fabrication. 415 volt 3 phase.
Features Include:
Electronic Auto Adjust for ease of set up.
2/4 torch latching.
Burn back and slop up control.
415 volt.
2 year warranty.
Supplied with MB36 style 3m torch and regulator.
10M interconnector option and water cooled option avallable on request.

CEMONT BLUMIG 503S Professional Separate MIG/MAG Welder

Large robust casing.
Welding current range: 35-500amps.
30 welding steps.
Wire sizes: 0.8-1.6mm.
Dimensions: 600 x 1250 x 1050mm.
Weight: 140kg.
5m or 10m wire feed inter connector link options.

Cemont Type 9V TIG Torch

For use with power source model number S1400 illustrated.

Plasma Cutter & Torch

Heavy duty three phase compressed air plasma cutting machines, for general-purpose use. These machines are ideal for high quality cutting of most conductive materials. A single switch allows for simple power control. Features include, torch safety circuit, and 6m cutting torch.

Sharp 40MC

Three-phase power supply 400V
Input power: 27.7kVA - 18.4kW
Max input current: 70A/40A
Effective input current: 50A/28A
Compressed air supply: 220l/min - 5.5 bars
Current range: 30 - 120A
Duty cycle at 40C: at 40% 120A, at 80% 85A, at 100% 50A
Cutting capacity (for steel): contact 8mm, quality 35mm, severance 40mm
Protection class: IP 23
Dimensions: 500 x 855 x 705mm
Weight: 125kg

Puma Power 1700



1700

A heavy duty single phase inverter MMA/scratch start T.I.G. machine with protection for use with power generators.
Welding current range: 5 - 160amps.
Duty cycle @ 60% 140amps.
Weldable electrodes 1.6 - 4.0mm.
Dimensions (L x W x H): 162 x 265 x 385mm.
Weight: 9kg.