CEMONT BLUMIG Professional Separate MIG/MAG Welders

Heavy duty 415 three phase separate wire feed MIG/MAG machine, fitted with a 4 roll heavy duty 4 x 4 wire feed system for accurate wire speed control. Features include Electronic Auto Adjust for ease of set up. This machine is ideal for production, maintenance and fabrication. 415 volt 3 phase.
Features Include:
Electronic Auto Adjust for ease of set up.
2/4 torch latching.
Burn back and slop up control.
415 volt.
2 year warranty.
Supplied with MB36 style 3m torch and regulator.
10M interconnector option and water cooled option avallable on request.

CEMONT BLUMIG 403S Professional Separate MIG/MAG Welder

Large robust casing.
Welding current range: 35-400amps.
30 welding steps.
Wire sizes: 0.6-1.2mm.
Dimensions: 500 x 1180 x 950mm.
Weight: 108kg.
4m or 10m wire feed interconnector link options.

Smarty TX160Alu

Heavy-duty single-phase inverter AC/DC T.I.G. / M.M.A. machine, for general-purpose use. Features include robust ABS plastic case to protect from accidental damage, T.I.G. pulsing on DC, wave balance and frequency control on AC, H.F. start, slope out, 2/4 latching, remote facility, hot start and Anti stick device. Simple controls for welding cycle control for post gas, down slop and post gas. Ideal for production, maintenance and on site fabrication.
Input Voltage: 240 volt 16amp
Welding Current Range: 5-150amps
Duty Cycle: 120amps @ 60%
Supplied with: TIG Torch, Earth lead, and Regulator
Optional Foot Pedal Available

Puma Power 1700



1700

A heavy duty single phase inverter MMA/scratch start T.I.G. machine with protection for use with power generators.
Welding current range: 5 - 160amps.
Duty cycle @ 60% 140amps.
Weldable electrodes 1.6 - 4.0mm.
Dimensions (L x W x H): 162 x 265 x 385mm.
Weight: 9kg.

Plasma Cutter & Torch

Heavy duty three phase compressed air plasma cutting machines, for general-purpose use. These machines are ideal for high quality cutting of most conductive materials. A single switch allows for simple power control. Features include, torch safety circuit, and 6m cutting torch.

Sharp 25MC

Three-phase power supply: 400V
Input power: 18.7kVA - 11.2kW
Max input current: 47A/27A
Effective input current: 29A/17A
Compressed air supply: 180l/min - 5 bars
Current range: 30 - 80A
Duty cycle at 40: at 40% 80A, at 80% 50A, at 100% 30A
Cutting capacity (for steel): contact 8mm, quality 20mm, severance 25mm
Protection class IP 23
Dimensions 500 x 855 x 705 mm
Weight 80kg

Cemont Portable Professional MMA/Tig Inverter Power Source

Heavy duty single phase inverter MMA/Touch Tig machine, for general purpose use. Features include robust front and rear profiles in tough ABS plastic to protect from accidental damage, hot start and anti-stick device. This machine is ideal for maintenance and on site fabrication.

Specifications:
Welding current range: 5 - 130amps.
Duty cycle: 50%: 125amps.
Weldable electrodes: 1.6 - 3.25mm.
240V single phase.
2 year warranty.
Dimensions (L x W x H): 145 x 235 x 340mm.
Weight: 7.7kg.

Puma S1400 Portable Professional MMA/Tig Inverter Power Source (Replaces S1401)

CEMONT BLUMIG Professional Separate MIG/MAG Welders

Heavy duty 415 three phase separate wire feed MIG/MAG machine, fitted with a 4 roll heavy duty 4 x 4 wire feed system for accurate wire speed control. Features include Electronic Auto Adjust for ease of set up. This machine is ideal for production, maintenance and fabrication. 415 volt 3 phase.
Features Include:
Electronic Auto Adjust for ease of set up.
2/4 torch latching.
Burn back and slop up control.
415 volt.
2 year warranty.
Supplied with MB36 style 3m torch and regulator.
10M interconnector option and water cooled option avallable on request.

CEMONT BLUMIG 503S Professional Separate MIG/MAG Welder

Large robust casing.
Welding current range: 35-500amps.
30 welding steps.
Wire sizes: 0.8-1.6mm.
Dimensions: 600 x 1250 x 1050mm.
Weight: 140kg.
5m or 10m wire feed inter connector link options.

Puma Power 2000



2000

A heavy duty single phase inverter MMA/scratch start machine
with protection for use with power generators
Welding current range: 5 - 180amps.
Duty cycle @ 60% 140amps.
Weldable electrodes 1.6 - 4.0mm.
Dimensions (L x W x H): 162 x 265 x 385mm.
Weight: 9kg.

Cemont BluMig Mig Welders

A range of compact Mig Welders for your choice of applications

BluMig 283C Professional Compact Mig Welder (Replaces Compact 283T)

Heavy duty three phase compact Mig/Mag machine, with four roll industrial feed system with auto adjusting wire speed. Features include electronic auto adjust for ease of set up, 2/4 torch latching, large robust casing, burn back and slope up control.

Specifications:
IP22 class protection.
415V three phase input, 16 amps.
Welding current range: 35 - 280 amps.
10 welding steps.
Wire sizes: 0.6 - 1.2mm.
3 year warranty.
Dimensions: 500 x 870 x 950mm.

Cemont Plasma Cutters

The Cemont SHARP 22 is a powerful plasma cutting installation based on inverter technology to ensure excellent regulation of the cutting current, this increases the cutting quality and makes it easy to handle. contact cutting increases the cutting quality and reduces the fume emissions. Supplied compete with torch, earth lead and sample consumables.

Cutting capacity (on steel)
in quality: 20mm
in separation: 24mm

SHARP 22 Plasma Cutter

Specification:
Input voltage three phase: 400V - 50/60Hz
Welding current: 10 - 65A
Duty cycle:
65A at 40% at 40C
50A at 100% at 40C
65A at 100% at 25C
Protection class: IP23
Dimensions: 435 x 235 x 380mm
Weight: 25kg

Plasma Cutter & Torch

Heavy duty three phase compressed air plasma cutting machines, for general-purpose use. These machines are ideal for high quality cutting of most conductive materials. A single switch allows for simple power control. Features include, torch safety circuit, and 6m cutting torch.

Sharp 40MC

Three-phase power supply 400V
Input power: 27.7kVA - 18.4kW
Max input current: 70A/40A
Effective input current: 50A/28A
Compressed air supply: 220l/min - 5.5 bars
Current range: 30 - 120A
Duty cycle at 40C: at 40% 120A, at 80% 85A, at 100% 50A
Cutting capacity (for steel): contact 8mm, quality 35mm, severance 40mm
Protection class: IP 23
Dimensions: 500 x 855 x 705mm
Weight: 125kg