Cemont BluMig Mig Welders

A range of compact Mig Welders for your choice of applications

BluMig 283C Professional Compact Mig Welder (Replaces Compact 283T)

Heavy duty three phase compact Mig/Mag machine, with four roll industrial feed system with auto adjusting wire speed. Features include electronic auto adjust for ease of set up, 2/4 torch latching, large robust casing, burn back and slope up control.

Specifications:
IP22 class protection.
415V three phase input, 16 amps.
Welding current range: 35 - 280 amps.
10 welding steps.
Wire sizes: 0.6 - 1.2mm.
3 year warranty.
Dimensions: 500 x 870 x 950mm.

Puma Power 2000



2000

A heavy duty single phase inverter MMA/scratch start machine
with protection for use with power generators
Welding current range: 5 - 180amps.
Duty cycle @ 60% 140amps.
Weldable electrodes 1.6 - 4.0mm.
Dimensions (L x W x H): 162 x 265 x 385mm.
Weight: 9kg.

CEMONT BLUMIG Professional Separate MIG/MAG Welders

Heavy duty 415 three phase separate wire feed MIG/MAG machine, fitted with a 4 roll heavy duty 4 x 4 wire feed system for accurate wire speed control. Features include Electronic Auto Adjust for ease of set up. This machine is ideal for production, maintenance and fabrication. 415 volt 3 phase.
Features Include:
Electronic Auto Adjust for ease of set up.
2/4 torch latching.
Burn back and slop up control.
415 volt.
2 year warranty.
Supplied with MB36 style 3m torch and regulator.
10M interconnector option and water cooled option avallable on request.

CEMONT BLUMIG 353S Professional Separate MIG/MAG Welder

Welding current range: 40-350amps.
14 welding steps.
Wire sizes: 0.6-1.2mm.
Dimensions: 500 x 1180 x 950mm.
Weight: 93kg.
4m or 10m wire feed interconnector link options.

CEMONT BLUMIG Professional Separate MIG/MAG Welders

Heavy duty 415 three phase separate wire feed MIG/MAG machine, fitted with a 4 roll heavy duty 4 x 4 wire feed system for accurate wire speed control. Features include Electronic Auto Adjust for ease of set up. This machine is ideal for production, maintenance and fabrication. 415 volt 3 phase.
Features Include:
Electronic Auto Adjust for ease of set up.
2/4 torch latching.
Burn back and slop up control.
415 volt.
2 year warranty.
Supplied with MB36 style 3m torch and regulator.
10M interconnector option and water cooled option avallable on request.

CEMONT BLUMIG 503S Professional Separate MIG/MAG Welder

Large robust casing.
Welding current range: 35-500amps.
30 welding steps.
Wire sizes: 0.8-1.6mm.
Dimensions: 600 x 1250 x 1050mm.
Weight: 140kg.
5m or 10m wire feed inter connector link options.

Plasma Cutter & Torch

Heavy duty three phase compressed air plasma cutting machines, for general-purpose use. These machines are ideal for high quality cutting of most conductive materials. A single switch allows for simple power control. Features include, torch safety circuit, and 6m cutting torch.

Sharp 25MC

Three-phase power supply: 400V
Input power: 18.7kVA - 11.2kW
Max input current: 47A/27A
Effective input current: 29A/17A
Compressed air supply: 180l/min - 5 bars
Current range: 30 - 80A
Duty cycle at 40: at 40% 80A, at 80% 50A, at 100% 30A
Cutting capacity (for steel): contact 8mm, quality 20mm, severance 25mm
Protection class IP 23
Dimensions 500 x 855 x 705 mm
Weight 80kg

Sharp 10KT Plasma Cutter

Sharp 10KT Plasma Cutter
Portable plasma cutter with integrated compressor for manual plasma cutting.
Specification:
Cutting capacity (on steel):
clean 8mm, max 10mm.
Input voltage single phase: 230V.
Primary power
consumption: 11.5A
Duty cycle:
(10 minutes at 40C)
20 A at 60%
Protection class: IP23.
Dimensions:
470 x 205 x 370mm.
Weight: 16kg.
Supplied complete with:
Earth cable, CPT 800
torch and safety
instructions.

Cemont Plasma Cutters

The SHARP 10 is a plasma cutter using inverter technology that ensures an excellent regulation of the cutting current, which increases the cutting quality. The digital display ensures better adjustment/control and optimal reading of the cutting parameters, whilst in use. Capable of contact cutting which increases the cutting quality and reduces fume emissions. Easy to transport weighing in at only 8Kg.

SHARP 10 Plasma Cutter

Specification:
Cutting capacity (on carbon steel)
in quality 6mm
in separation 10mm
Input voltage single-phase: 230V - 50/60Hz
Effective consumption: 14A
Compressed air consumption: 100 l/min - 4 bars
Welding current: 10 - 30A
Duty cycle at 40C:
at 35% 30A
at 60% 25A
at 100% 20A
Protection class: IP23
Dimensions: 415 x 150 x 310mm
Weight: 8kg

Supplied complete with:
torch, earth lead and sample consumables.