Gas & Tig Welding Rods

General purpose steel rod for high grade oxy-acetylene welding of mild steel and wrought iron. Widely used for automobile, heating and ventilation. No flux required. Melts at 1490C.

Saffire Copper Coated Mild Steel

Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.

Murex Tungsten Electrodes

Murex Tungsten Electrodes are available in three types: Thoriated (1.6mm), Ceriated (1.6 and 2.4mm) or Zirconiated (1.6mm, 2.4mm and 3.2mm). Packs of 10.

2% Thoriated, Colour Coded Red

Designed for DC (Neg) or straight polarity use. Maintain a sharp tip configuration during welding. Suitable for use with steels, nickel alloys and most alloys other than aluminium and magnesium. Not for AC welding.

Aluminium Tig/Gas Welding Rods

Saffire aluminium 5% silicon & magnesium. BS 2901:Part 4 : 1990 4043A (Tig Rods). BS 1453:1972(1987) 4043A (Gas Rods) AWS A/SFA 5-10-88:ER 4043.



Suitable for welding a wide range of cast and wrought aluminium alloys containing up to 5% magnesium. Particularly suited to Tig welding (with argon shielding gas). Use with aluminium flux for oxy-acetylene welding.

Spark Lighters

For easy and rapid single handed ignition of welding and cutting torches.

Cup Type

Portable MIG/MAG Welding Unit

For Tradesmen ? repair, maintenance and assembly welding of mild steels, aluminium and stainless steels as well as brazing. This easy to use, intelligent and powerful unit, offers excellent welding properties and is easy to take along to the job at hand. Lightweight, durable and impact resistant housing with inbuilt cable wraps for ease of transportation. The low weight of 11.5 kg makes it easy to move to different indoor or outdoor worksites. Weld mild steels, stainless steels or aluminium. MIG/MAG brazing of galvanized plates is another application. Solid or gasless cored wires can be used. A versatile unit for repair, maintenance or assembly work in the workshop, outdoors or at different sites. Single phase mains connection makes it easy to find an electricity supply. Standards IEC/EN 60974-1, EN 60974-10. Auto fuse (MCB) EN 60898 type B 20. Enclosure class IP23, application class S.
Maximum welding output: 200A
Permitted load at 25% duty cycle, 180A/23V, 100% duty cycle, 100A/19V
Setting range: 30-200A
Open circuit voltage: 60V
Wire feed speed: 2 ? 12m/min
Max. size of the wire reel: 200mm/5kg
Open circuit power: 15W
Dimensions (LxWxH): 449x198x347mm
Weight with torch & cables, kg 11.5

Caddy Mig C200i

Saffire XL5 Flashback Arrestors

Give a high flow rate and are equipped with a large cylindrical flame arresting element, an automotive reset non-return valve and a heat sensitive automatic cut-off. Should be used in conjunction with hose check valves.

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. For use with blowpipes* 1143, 1144; Saffire NM250; Citogas NMC200. Up to 766,000 Btu/h can be achieved from 5H when used on blowpipe with adaptor. *Use adaptor 120458.

Available in a choice of:
1H (72-163Btu/h [1000s])
2H (102-188Btu/h [1000s])
3H (183-361Btu/h [1000s])
4H (236-401Btu/h [1000s])
5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H