Nozzle Cleaner Set

Prolongs the life of gas welding and cutting nozzles. High strength, needle type files housed in an anodised aluminium flip-up pocket case.

Hand Held Shields

Both models have UK size lens aperture (4 1/4" x 3 1/4"). Lenses supplied separately, see below. SF12 Fibre Glass Hand Shield - Long shell type. SF2 Fibre Glass Hand Shield - Flat fronted long shell type

Red Acetylene Hose

Fitted hoses. Kink and crush resistant. 6.3mm for general use, 10mm for heavy duty use.

Murex Mig Spares

For torch compatibility please refer to our catalogue.

Contact Tips

Murex Mig Spares

For torch compatibility please refer to our catalogue.

Contact Tips

Murex Mig Accessories

Long, Tapered and Parallel nozzles available.

Nozzles

Welding Helmet & Respirator

The Origo? Tech 9-13 helmet features comfort headgear, whilst the lightweight shell offers superior face, head, ear & neck protection, which allows for all position welding.
Variable shade ADF uses the latests technology and has proven reliabilty. The ADF is screw retianed and sits in a fully moulded light seal cradle, which also creates a slight convex curve on the front spatter lens for extra security and strength. Fully assembled and ready to use.
The Origo? Air powered respiratory unit has been designed to fit the Origo? Tech welding helmets.
The unit provides clean, filtered air to increase the comfort and safety for the welder.
The Origo? Air is delivered complete with an 8-hour battery, P3 filter, comfort pad, waist belt and an air hose with a Proban hose cover fitted. The unit is supplied with an inteligent charger, which will ensure a prolonged life time of the battery, by reducing the risk of over charging. Also equipped with a low flow alarm, which will give audible signal when the filter is blocked, or the battery is running low.

Origo? Tech & Origo? Air Combination

Murex Lightweight A-FN Cutting Nozzles

A choice of 2 A-FN cutting nozzles, for use with DH lightweight cutting attachments.

144735 Nozzle diameter 1/32". Plate thickness (mild steel) 3-6mm.
144736 Nozzle diameter 3/64". Plate thickness (mild steel) 6-20mm.

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. For use with blowpipes* 1143, 1144; Saffire NM250; Citogas NMC200. Up to 766,000 Btu/h can be achieved from 5H when used on blowpipe with adaptor. *Use adaptor 120458.

Available in a choice of:
1H (72-163Btu/h [1000s])
2H (102-188Btu/h [1000s])
3H (183-361Btu/h [1000s])
4H (236-401Btu/h [1000s])
5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H

Murex Heavy Duty Swaged Welding Nozzles

For use with Saffire 5, 4 & 3. Plate thickness refers to mild steel.

Murex Saffire 5 Cutting Attachment

For use with No.5 shank and ANM/PNM nozzles.