Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.

Saffire Regulators

With twin bulk head gauges clearly displaying cylinder pressure and flow rate. Comply with EN ISO 2503.
0-4 bar Oxygen (Blue) type is suitable for medium cutting and welding applications.
0-10 bar Oxygen (Blue) type is suitable for most applications including heavy cutting and heating.
A-1.5 Acetylene (Red) type is suitable for all cutting, heating and welding applications.
ArC-35L Argon type is suitable for inert gases eg for use with Mig or Tig welders.

Series 1 Single Stage

Murex Mig Accessories

Long, Tapered and Parallel nozzles available.

Nozzles

Saffire XL5 Flashback Arrestors

Give a high flow rate and are equipped with a large cylindrical flame arresting element, an automotive reset non-return valve and a heat sensitive automatic cut-off. Should be used in conjunction with hose check valves.

Murex LW1 MIG Wire Reels

Precision layer wound for snag free production. Gas shielded, deposits C - 1.3% Mn weld metal for mild and medium tensile steels. Copper coated, double deoxidised with manganese and silicon with good mechanical properties. For use with CO2 and AR-CO2. For welding mild steel and C-Mn steels. Available in 0.8mm (15kg drum), 1.0mm and 1.2mm (18kg drums). Made to BS 2901/1 : 1983 A18 & BS EN 440 G3 Si1.

LW1 Mig Wire Reel

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. For use with blowpipes* 1143, 1144; Saffire NM250; Citogas NMC200. Up to 766,000 Btu/h can be achieved from 5H when used on blowpipe with adaptor. *Use adaptor 120458.

Available in a choice of:
1H (72-163Btu/h [1000s])
2H (102-188Btu/h [1000s])
3H (183-361Btu/h [1000s])
4H (236-401Btu/h [1000s])
5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H

Red Acetylene Hose

Fitted hoses. Kink and crush resistant. 6.3mm for general use, 10mm for heavy duty use.

Stainless Steel Welding Rods

All rods 1m long. (All weights approximate.)

Saffire 18/8/3 Mo - 316L AWS A/SFA 5-9-93. ER316L. EN12072. W19123L.

Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Murex Mig Spares

For torch compatibility please refer to our catalogue.

Contact Tips

Aluminium Tig/Gas Welding Rods

Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Saffire 18/8/3 Mo - 316L AWS A/SFA 5-9-93. ER316L. EN12072. W19123L.