Stainless Steel Welding Rods

All rods 1m long. (All weights approximate.)

Saffire 18/8/3 Mo - 316L AWS A/SFA 5-9-93. ER316L. EN12072. W19123L.

Low carbon austenitic filler rod for welding steels of similar composition (19% Cr, 12% Ni, 3% Mo). Use with argon shielding gas or argon/5% hydrogen.

Murex Mig Spares

For torch compatibility please refer to our catalogue.

Contact Tips

Murex Mig Accessories

Long, Tapered and Parallel nozzles available.

Nozzles

Cutting Nozzles

75mm long acetylene nozzle mix can be used with the majority of popular cutting torches including Saffire 5, 4 & 3, NM250, 400 & 500. Plate thickness refers to mild steel. ASNM: For cutting sheet metal.

Murex Lightweight Swaged Welding Nozzles

For use with DH lightweight shank and welding mixer, above. Plate thickness refers to mild steel.
A range of 9 types, for use with DH lightweight shank and welding mixer.

Plate thickness (mild steel):
No.1 0.9mm.
No.2 1.2mm.
No.3 2.0mm.
No.5 2.6mm.
No.7 3.2mm.
No.10 4.0mm.
No.13 5.0mm.
No.18 6.5mm.
No.25 8.2mm.

Blue Oxygen Hose

Fitted hoses. Kink and crush resistant. 6.3mm for general use, 10mm for heavy duty use.

Electrodes for Mild Steels

Arc welding rods for mild steel and medium tensile steels.

Zodian Universal 6013

Medium rutile coated, all positional rods.
Applications: for stainless plate structural steels, pipe work and vessels. Ideal for food industry, chemical, pharmaceutical and processing plant fabrications.
NB suitable for AC (50V minimum open circuit) and DC+

Murex Tungsten Electrodes

Murex Tungsten Electrodes are available in three types: Thoriated (1.6mm), Ceriated (1.6 and 2.4mm) or Zirconiated (1.6mm, 2.4mm and 3.2mm). Packs of 10.

2% Thoriated, Colour Coded Red

Designed for DC (Neg) or straight polarity use. Maintain a sharp tip configuration during welding. Suitable for use with steels, nickel alloys and most alloys other than aluminium and magnesium. Not for AC welding.

Blue Oxygen Hose

Fitted hoses. Kink and crush resistant. 6.3mm for general use, 10mm for heavy duty use.

Welding Helmet & Respirator

The Origo? Tech 9-13 helmet features comfort headgear, whilst the lightweight shell offers superior face, head, ear & neck protection, which allows for all position welding.
Variable shade ADF uses the latests technology and has proven reliabilty. The ADF is screw retianed and sits in a fully moulded light seal cradle, which also creates a slight convex curve on the front spatter lens for extra security and strength. Fully assembled and ready to use.
The Origo? Air powered respiratory unit has been designed to fit the Origo? Tech welding helmets.
The unit provides clean, filtered air to increase the comfort and safety for the welder.
The Origo? Air is delivered complete with an 8-hour battery, P3 filter, comfort pad, waist belt and an air hose with a Proban hose cover fitted. The unit is supplied with an inteligent charger, which will ensure a prolonged life time of the battery, by reducing the risk of over charging. Also equipped with a low flow alarm, which will give audible signal when the filter is blocked, or the battery is running low.

Origo? Tech & Origo? Air Combination