No.1263 3/8" BSP Two way outlet valve

The No.1263 two way outlet valve from Bullfinch has a 3/8" BSP - LH female union with two 4.8mm hose ends. Needle valves on each outlet. Gives two outlets off a Bijou regulator.

Burners for Standard Torches

Robust, strong, reliable burners for a wide range of needs. No 1470 - Extremely fine flame - for jewellers and dental purposes. No 1472 - Well defined flame. No 1473 - Soft flame for heat shrinking. No 1210 - Small flame for narrow window sashes, central heating installations. No 1220 - Medium flame - for soldering and silver soldering. No 1230 - General purpose flame. No 1240 - More powerful general purpose flame. No 1248 - Standard fishtail burner, excellent flame structure over a wide range of pressures. For paint stripping and applications needing wide fantail flame. No 1250 - Suitable for metal melting. No 1260 - Powerful flame for general engineering purposes. No 1270 - Extremely powerful, for heavy soldering, forging, roofing, weed burning.

Autotorch Brazing System

A portable bronze brazing system using only a single cylinder of propane. Automatic piezo-electric ignition plus interchangeable burners.

Burners

No 4103 giving the smallest, No 4105 the largest, flames. The burners must be used at 4 bar pressure and should not be turned down. If a smaller flame is required a smaller burner must be used.

Multiple Burner Adaptors

Allow two or three burners to be attached extended torch handle No. 1345 or to other torch handles (the latter usually in conjunction with the extension tubes Nos.1112, 1124 & 1140). Length: 120mm. Burner spacing: 125mm.

Extension Tubes

For use between handle and burner for extending the reach. Can also be used in conjunction with multiple burner adaptors Nos. 1122 and 1123.

Autotorch System

Automatic push-button, piezo-electric ignition plus nine easy to change burners. Gone are the days of looking for matches; or the irritation of trying to light in windy conditions. To BS EN 731.

No 2100 Handle

Strong, glass-filled nylon handle, styled for maximum comfort. Incorporates needle valve and piezo-electric ignitor. Takes any of the burners for Autotorch system 2 (but not for Autotorch brazing system).

Autotorch System

Automatic push-button, piezo-electric ignition plus nine easy to change burners. Gone are the days of looking for matches; or the irritation of trying to light in windy conditions. To BS EN 731.

Burners

No 2101\t- Very fine needle flame burner for precision work. No 2102 - Fine flame burner for localised heating. No 2103 - Small flame burner for soldering small assemblies. No 2104 - Medium flame burner for heating, plumbing and engineering where a compact well defined flame is required. No 2105\t- General purpose heating and soldering burner with a large well defined flame. No 2106 - More powerful flame for general use. No 2110 - Autotorch fishtail burner. A superb tailor made burner to give quick and efficient paint stripping; also for plastic tile laying, heat shrinking of plastics. No 2120 - Autotorch hot air burner. Gives a very short flame which barely emerges from the end of the burner. This draws in a large amount of air which is heated by the flame. Ideal for paint stripping, and heat shrinking of plastics. No 2121 - Autotorch soft flame burner. Well spread flame for heat shrinking of plastics for cable jointing and other industrial plastics.

Burners for Standard Torches

Robust, strong, reliable burners for a wide range of needs. No 1470 - Extremely fine flame - for jewellers and dental purposes. No 1472 - Well defined flame. No 1473 - Soft flame for heat shrinking. No 1210 - Small flame for narrow window sashes, central heating installations. No 1220 - Medium flame - for soldering and silver soldering. No 1230 - General purpose flame. No 1240 - More powerful general purpose flame. No 1248 - Standard fishtail burner, excellent flame structure over a wide range of pressures. For paint stripping and applications needing wide fantail flame. No 1250 - Suitable for metal melting. No 1260 - Powerful flame for general engineering purposes. No 1270 - Extremely powerful, for heavy soldering, forging, roofing, weed burning.

Autotorch System

Automatic push-button, piezo-electric ignition plus nine easy to change burners. Gone are the days of looking for matches; or the irritation of trying to light in windy conditions. To BS EN 731.

Burners

No 2101\t- Very fine needle flame burner for precision work. No 2102 - Fine flame burner for localised heating. No 2103 - Small flame burner for soldering small assemblies. No 2104 - Medium flame burner for heating, plumbing and engineering where a compact well defined flame is required. No 2105\t- General purpose heating and soldering burner with a large well defined flame. No 2106 - More powerful flame for general use. No 2110 - Autotorch fishtail burner. A superb tailor made burner to give quick and efficient paint stripping; also for plastic tile laying, heat shrinking of plastics. No 2120 - Autotorch hot air burner. Gives a very short flame which barely emerges from the end of the burner. This draws in a large amount of air which is heated by the flame. Ideal for paint stripping, and heat shrinking of plastics. No 2121 - Autotorch soft flame burner. Well spread flame for heat shrinking of plastics for cable jointing and other industrial plastics.

Standard Torch Handles

No. 1185 - With comfortable, flat nylon handle strong enough to withstand rough usage. With standard needle valve. No. 1185/01 - As No. 1185 except hose inlet is replaced with 3/8" BSP-LH male union connection. No. 1245 - Designed with robust nylon handle and trigger operated diaphragm valve - pilot flame is quickly obtained by adjusting the cam ring above the trigger; full flame is given by pulling trigger which can be locked in position for continuous burning. No. 1340 - Specially designed with an immensely strong steel spring handle to stand up to the tough conditions of contractors' use. With standard needle valve. No. 1345 Extended Torch Handle Only (not illustrated) - Extra long handle with arm rest for extra comfort. Standard needle valve. Takes any of the standard burners and can be used in conjunction with the multiple burner adaptors Nos. 1122 and 1123. Overall length: 1060mm.