ANM Cutting Nozzles

Acetylene nozzle mix can be used with the majority of popular cutting torches. Plate thickness refers to mild steel.

ANM Cutting Nozzles

Acetylene nozzle mix can be used with the majority of popular cutting torches. Plate thickness refers to mild steel.

Kennedy Welding Accessories

Kennedy PVC welding curtains comply with EN1598 to block out welding light. The curtains have snap-fasteners on both sides to allow several to be joined together to create the desired width.

Supplied with reinforced holes on the upper edge and steel suspension rings.

PVC Welding Curtains

All Kennedy PVC welding curtains are made of a pliable, self-extinguishing PVC material with a flash point of 320-390C.

Conform to: EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition).

Supplied with steel curtain rings.

Available in a range of sizes and colours.

PNM Cutting Nozzles

Acetylene nozzle mix can be used with the majority of popular cutting torches. Plate thickness refers to mild steel.

Kennedy MIG Welders

Heavy-duty transformer and turbo fan cooling allows welding at higher power for longer periods. Automatic wire speed control with manual override. Professional torch with trigger-controlled power and gas prevents undesired arcing and gas wastage. The torch cable can be detached from the machine. 35A minimum output. Accepts 0.7kg, 5kg and 15kg spools for maximum portability and economy. Heavy duty case for durability. Mig/Mag (gas) welding only. Six position, stepped voltage regulator allows process selection to be pre-set. Supplied complete with a smooth action, twin roller feed unit, two large diameter solid wheels and 2m mains cable. Suitable for automotive, farm, maintenance and contractor use. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements.
Insulation class H. Protection degree IP22.

Lion? EMW 220 Compact MIG Welder

Lion? Specification:
Welding capacity: steel wire 0.6-1mm, stainless steel wire 0.8mm, aluminium wire 0.8 - 1.0mm.
Maximum reel size: 15kg.
Input voltage: 230V, 50/60Hz.
Fuse rating: 16A.
Phase: 1.
Power consumption: 3.7kW max. (1.4kW 60%).
Output current range: 30A-220A (DC).
Open circuit voltage: 17.8-34V.
Product dimensions (L x W x H): 78 x 45 x 71cm.
Box dimensions (L x W x H): 84 x 35 x 57cm.
Contents:
Lion EMW-220 power supply.
1.5m cable, 16mm2.
Earth clamp, 150A.
2.5m Mig torch, 160A.
Mig wire reel 0.8mm x 0.2kg.
Instruction manual.

Mini Gas Regulator

Gas regulator that fits to disposable gas bottles. Features a 1/8` BSP inlet bottle fitting and a quick push fit outlet. For use when fitting disposable gas bottles to small Mig or Tig welders.
Maximum pressure: 130 bar.

Gas Bottle Connection Kit

Connection kit for use on mini disposable gas cylinders.
Contains 1 x mini gas regulator, 1/16" ID x 600mm tube, 3/16" ID x 200mm tube, 1/16" x 3/16" hose reducer, 2 x 8-12mm hose clips.

Mig Welders

Heavy-duty transformer and turbo fan cooling allows welding at higher power for longer periods. Automatic wire speed control with manual overide. Professional torch with trigger-controlled power and gas prevents undesired arcing and gas wastage. Extra Low current performance - Able to deliver a 30A minimum output for welding very thin material easily. Accepts 0.7kg or 5kg spools for maximum portability and economy. Heavy duty case for durability. Can be used for flux (no gas) and Mig/Mag (gas) welding. Four position, stepped voltage regulator allows process selection to be pre-set. Supplied complete with a smooth action, twin roller feed unit, accessories, two large diameter solid wheels and 2m mains cable. Suitable for automotive, farm, maintenance and contractor use. 2 year warranty. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP21.

Leopard EMW-150 Dual MIG Welder

Welding capacity: steel wire: 0.6 - 0.8mm, stainless steel wire: 0.8mm, aluminium wire: 0.8 - 1.0mm, flux cored welding wire: 0.8mm 1.2. Maximum reel size: 5kg.Input voltage: 230V, 50/60Hz. Fuse rating: 16A. Phase: 1. Power consumption: 3.7kW max. (1.4kW 60%). Output current range: 30A - 145A (DC). Open circuit voltage: 31V. Dimensions: (L x W x H) 680 x 285x 410mm.
Contents: LeopardTM EMW-150 power supply. 1.8m cable, 10mm2. Earth clamp, 150A. 2m Mig torch, 160A. Flux cored wire coil 0.9mm x 0.2kg. Hand held face shield with 51 x 107mm glass. Scratch brush and slag remover. Instruction manual.

Mig Welder

Heavy-duty transformer and turbo fan cooling allows welding at higher power for longer periods. Automatic wire speed control with manual override for continuous and spot welding. Professional torch with trigger-controlled power and gas prevents undesired arcing and gas wastage. Extra low current performance - Able to deliver a 30A minimum output for welding very thin material easily. Accepts 0.7kg, 5kg and 15kg spools for maximum portability and economy. Heavy duty case for durability. Mig/Mag (gas) welding only. Six position, stepped voltage regulator allows process selection to be pre-set. Supplied complete with a smooth action, twin roller feed unit, two large diameter solid wheels and 2m mains cable. Suitable for automotive, farm, maintenance and contractor use. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP21. Welding capacity: steel wire: 0.6 - 0.8mm, stainless steel wire: 0.8mm, aluminium wire: 0.8 - 1.0mm. Maximum reel size: 15kg. Input voltage: 230V, 50/60Hz. Fuse rating: 16A. Phase: 1. Power consumption: 5.2kW (2.3 kW 60%)Output current range: 30A - 170A (DC). Open circuit voltage: 31V. Product dimensions: (L x W x H) 80 x 45 x 57cm. Box dimensions: (L x W X H) 84 x 35 x 52cm.

Tiger EMW-170

Panther EMW-120 Dual MIG Welder

A high power single phase welder that operates from a standard 240V household outlet. Heavy-duty transformer and turbo fan cooling allows welding at higher power for longer periods. Automatic wire speed control with manual overide. Professional torch with trigger-controlled power and gas prevents undesired arcing and gas wastage. Low current performance - Able to deliver a 50A minimum output for welding thin material easily. Variable wire spool size capability - Accepts both 0.7kg and 5kg spools for maximum portability and economy. Heavy duty redesigned case for durability combined with low weight and portability. Can be used for flux (no gas) and Mig/Mag (gas) welding. Four position, stepped voltage regulator allows process selection to be pre-set. Safety features include fan cooling and thermal protection. Supplied complete with a smooth action, twin roller feed unit, accessories, integrated carrying handle and 2m mains cable. Ready to use and fully portable. Suitable for automotive, farm, maintenance and contractor use. 2 year warranty. Conforms to TUV-GS, GOST, EMC, LVD and all relevant CE requirements. Insulation class H. Protection degree IP21.

Input voltage: 230V, 50/60Hz.
Fuse rating: 10A.
Phase: 1.
Power consumption: 3.6kW max. (1.3kW60%).
Output current range: 50A - 120A (DC).
Open circuit voltage: 30V.
Dimensions: (L x W x H) 480 x 275 x 380mm.

MIG Welder