Senator® Desoldering Pump

Single-handed use. Quickly removes molten solder from joints.
Lightweight. Smooth action sprung loaded piston. Nozzle easily removed for cleaning. Smooth action. Temperature resistant, can be placed directly onto solder to be removed.
Ensures quick and easy removal of components from boards.
Antistatic body ensures excellent component protection.
Single handed use. Self-cleaning design-ejector rod discharges solder from the nozzle*.
Pump is easily disassembled for further cleaning.
*Note: Ensure that the rod is pushed fully down to completely discharge any excess solder from the nozzle.
Dimensions (W x H x D): 60 x 240 x 25mm.
Weight: 50g gross weight.

Butane Soldering Torch

Cordless soldering torch, butane powered, simple to refill. Suitable for soldering, light gauge welding, brazing. The gas fuel level can be seen clearly in the transparent 20ml tank. Textured anti-slip barrel, flint wheel in cap for ignition. Safety wire stand prevents the soldering iron from rolling when not in use. Supplied with pointed soldering tip and blow torch nozzle. Can be used with hot knife, gas torch and deflector tips. Supplied without butane.
Power rating: 25W to 80W
Soldering temperature: 210C to 400C
Maximum temperature: 1300C
Run time: 120 minutes (full tank of fuel at mid heat level setting)
Overall length with cap: 220mm
Overall length with soldering tip: 190mm
Overall length with torch tip: 172mm

Replacement Soldering Tips

Iron plated. For Use with PRO 50/PRO 70.

Tin/Lead Alloy Multicore Solder

60% Tin, 40% Lead. Suitable for general purpose electrical work. Supplied on reels. Melting range 183 - 188C. With 5 core 362 flux.

Monument Tools Soldering/Brazing Mats

Prevents burn damage to the surrounding area when soldering. Resistant to temperatures up to 600°C and does not present any of the hazards associated with asbestos materials. Available in 2 sizes: 250 x 250mm and 300 x 300mm.

Kennedy® Val-U-Vac Desoldering Tools

Removal of molten solder is achieved by the spring loaded piston creating a vacuum in the barrel of the tool. Both models have extraction springs located outside of the vacuum chamber and PTFE nozzles to prevent solder sticking. With safety shield. Nozzle size: 3mm OD x 1.5mm ID x 20mm long.

Professional Desoldering Tool DSGPRM

With a robust anodised aluminium body and steel plunger suitable for professional use. Removal of molten solder is achieved by the spring loaded piston creating a vacuum in the barrel of the tool. With extraction spring located outside of the vacuum chamber and PTFE nozzle to prevent solder sticking. With safety shield. Nozzle size: 3mm OD x 1.5mm ID x 20mm long.

8 Piece Butane Soldering Iron Kit

Butane soldering iron with piezo self ignition. Fully adjustable temperature control with 'safety fuel cut-off' feature when cap is replaced. Comes complete with 5 tip attachments, cleaning sponge and safety stand.

Kit contents:
1x butane soldering iron.
5x tip attachments: 2.4mm and 4.8mm double flat, hot knife, hot air blower and hot air deflector.
1x cleaning sponge.
1x safety stand.

Easy-flo? Flux Paste

Easy-flo Flux Paste is a brazing flux suitable for use with silver brazing filler metals. It has a working range of 575-825C and can be used with silver brazing filler metals melting below 775C (such as several of the Silver-flo, Easy-flo and Argo-braze alloys).
Easy-flo Flux Paste exhibits better life at temperature and greater overheat resistance than many other flux pastes. Easy-flo Flux paste has a low melt viscosity and as such performs well when pasted onto vertical surfaces, and can be useful when brazing stainless steel. The molten viscosity of Easy-flo Flux Paste is such that it holds on vertical surfaces. It is therefore particularly useful when brazing joints in positions where other fluxes may have a tendency to run away from the joint. N.B. EasyFlo powder illustrated.

Easy-flo? Flux Powder

Easy-flo Flux Powder is Johnson Mattheys leading brand brazing flux. It is sold widely throughout the world and is recognised as one of the best flux powders available. It is very fluid at the bottom end of its working range resulting in early and extensive flux spread. This ensures that the joint surfaces are well protected from oxidation at the earliest possible point of the brazing operation. This high level of fluidity also helps to reduce flux voids/entrapment in the joint, the low viscosity of the flux aiding its displacement by the brazing filler metal from the joint gap. Easy-flo Flux Powder has a working range of 550-800C. It is suitable for use with silver brazing filler metals melting below 750C (such as Silver-flo, Easy-flo and Argo-braze filler metals).

Easy-flo Flux Powder has excellent hot rodding characteristics and adheres well to a warmed brazing rod allowing flux to be transferred to the joint area via the rod. This characteristic has made Easy-flo Flux Powder very popular in hand brazing operations where the time to produce a brazed component is crucial.

SI Series Soldering Irons

Ergonomically designed triangular section handles. 240V models are fitted with 3-pin plugs. All models except SI 120 are supplied with mini stands. All models have replaceable nickel-plated copper tips.

240V Supply

Wattage: 120W