Replacement Soldering Tips

Iron plated. For Use with PRO 50/PRO 70.

Fry Fluxite Soldering Paste

For engineering, plumbing and sheet metal soldering. Residue can be removed with warm detergent solution.

Tin/Lead Alloy Multicore Solder

60% Tin, 40% Lead. Suitable for general purpose electrical work. Supplied on reels. Melting range 183 - 188C. With 5 core 362 flux.

Adcola Soldering Irons

The K212-3 12 volt AC/DC Soldering Iron is supplied complete with tip, a suspension hook and four metres of cable fitted as standard with cigar lighter plug, battery clips and cigar lighter socket.

The Adcola K212-3 soldering iron kit is suitable for use soldering components onto printed circuit boards, micro-electric soldering SMD and general use in the electronics industry.

The lightweight design with a shim retained tip to prevent seizure and the K series iron is so that an efficient heat flow is maintained to the tip, while the handle stays cool.

K212-3 12V Low Voltage Soldering Iron Kit

K212-3 specification:
Rated 400°C to 420°C (750°F to 790°F).
Tip diameter 4.75mm (3/16'').
Supplied with 4057 Adiron tip.
K2240A/S Iron is fitted with an antistatic handle and 5036 copper tip.
Wattage equivalent: 25.

Grosvenor Tin/Lead Solder

60% tin, 40% lead. Suitable for general purpose electrical work. Melting range 183 - 188C.

Kennedy® Val-U-Vac Desoldering Tools

Removal of molten solder is achieved by the spring loaded piston creating a vacuum in the barrel of the tool. Both models have extraction springs located outside of the vacuum chamber and PTFE nozzles to prevent solder sticking. With safety shield. Nozzle size: 3mm OD x 1.5mm ID x 20mm long.

Anti-Static Val-U-Vac

With carbon impregnated tip and body to prevent solder adhesion and dispel static. Conforms with CECC 15.

Senator® Soldering Irons

The Senator® Butane soldering torch can be used anywhere to solder circuit boards, craft projects, thawing frozen locks, shrinking heat seal plastic tubing and cauterising rope. Using standard butane lighter fuel the soldering iron has an output of 30 to 80W with a maximum temperature of up to 1,300°C.

Features Include:
Up to 45 minutes continuous use from one fill.
Protective cap with pocket clip.
Flint type igniter in cap.
Adjustable gas flow regulator.
Built-in window indicates fuel level.
Supplied without fuel.

4 in 1 Butane Soldering Torch Kit

Kit contains:
Butane soldering tool
2.4mm soldering tip.
Hot knife tip.
Hot air tip.
Flame tip.
Protective cap with pocket clips.
Stand and sponge.
Supplied in fitted plastic case.

Tip operating temperature (up to):
Soldering: 400°C.
Blow torch: 1,300°C.
Hot air blower (not included): 500°C.
Hot knife (not included): 425°C.

Butane Soldering Kit

Impact resistant plastic case with shock absorbing high density foam inlay. Contains the solder PRO 70 butane powered soldering torch, pointed soldering tip, hot knife tip, blow torch tip and heat blower tip, coil of 60/40 resin cored solder and tip cleaning pad. Supplied without butane.

Senator® Butane Soldering Iron Tips

For use with Senator® Butane Soldering Irons.



Must be used with the interchangeable tip holder SEN-516-2200K.

Fry Fluxite Soldering Paste

For engineering, plumbing and sheet metal soldering. Residue can be removed with warm detergent solution.