Grosvenor Tin/Lead Solder

60% tin, 40% lead. Suitable for general purpose electrical work. Melting range 183 - 188C.

Senator® Soldering Irons

The Senator® Butane soldering torch can be used anywhere to solder circuit boards, craft projects, thawing frozen locks, shrinking heat seal plastic tubing and cauterising rope. Using standard butane lighter fuel the soldering iron has an output of 30 to 80W with a maximum temperature of up to 1,300°C.

Features Include:
Up to 45 minutes continuous use from one fill.
Protective cap with pocket clip.
Flint type igniter in cap.
Adjustable gas flow regulator.
Built-in window indicates fuel level.
Supplied without fuel.

4 in 1 Butane Soldering Torch Kit

Kit contains:
Butane soldering tool
2.4mm soldering tip.
Hot knife tip.
Hot air tip.
Flame tip.
Protective cap with pocket clips.
Stand and sponge.
Supplied in fitted plastic case.

Tip operating temperature (up to):
Soldering: 400°C.
Blow torch: 1,300°C.
Hot air blower (not included): 500°C.
Hot knife (not included): 425°C.

Butane Soldering Kit

Impact resistant plastic case with shock absorbing high density foam inlay. Contains the solder PRO 70 butane powered soldering torch, pointed soldering tip, hot knife tip, blow torch tip and heat blower tip, coil of 60/40 resin cored solder and tip cleaning pad. Supplied without butane.

Grosvenor Tin/Lead Solder

60% tin, 40% lead. Suitable for general purpose electrical work. Melting range 183 - 188C.

Sif Stainless Steel Flux

General-purpose brazing flux for silicon bronze rods.

Sif Bronze Flux 500gm

Tinmans Blowpipe Solder

Melting range 183 - 188C. Complies to CN29453, QQS571E, BS 219 & DIN 1707.

Tinmans Grade K;60% Tin - 40% Lead
Supplied as single, 227gm/(1/2lb) sticks.

Engineering Grade C;40% Tin - 60% Lead
Electrical Grade K;60% Tin - 40% Lead
Supplied in packs of 10 - 61.22gm sticks

Butane Soldering Torch

Cordless soldering torch, butane powered, simple to refill. Suitable for soldering, light gauge welding, brazing. The gas fuel level can be seen clearly in the transparent 20ml tank. Textured anti-slip barrel, flint wheel in cap for ignition. Safety wire stand prevents the soldering iron from rolling when not in use. Supplied with pointed soldering tip and blow torch nozzle. Can be used with hot knife, gas torch and deflector tips. Supplied without butane.
Power rating: 25W to 80W
Soldering temperature: 210C to 400C
Maximum temperature: 1300C
Run time: 120 minutes (full tank of fuel at mid heat level setting)
Overall length with cap: 220mm
Overall length with soldering tip: 190mm
Overall length with torch tip: 172mm

Adcola Replacement Soldering Tips

For XS & X25 Series.

Tips Suitable For Antex Tools - Adiron Tips

Kennedy® Butane Soldering Tool

BS125
Piezo self ignition. Uses standard butane lighter fuel and is simple to refill. Fully adjustable tip temperature control with a safety fuel cut-off when cap is replaced. Textured anti-slip barrel with built in stand for anti roll. Supplied with pointed soldering tip. Can be used with single flat, double flat, hot air, hot air deflector and hot knife, can also be used as a blow torch. Supplied without fuel.

Power rating: 25W to 125W.
Soldering temperature: 580°C to 1300°C.
Run time: 60 minutes.
Overall length with cap: 235mm.
Overall length with soldering tip: 230mm.

Replacement Heavy Duty Soldering Tips

For use with PRO 100/PRO 120. Manufactured from copper stock, iron and nickel plated before finally 'tinned', ready for use.