Silver Solder Bars

55% silver, 21% copper, 22% zinc and 2% tin. Melting range 630 - 660C. General purpose solder.
Complies to BS1845/AG2. Diameter: 1/16" Average length: 600mm.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS125 soldering iron.

Fry Powerflow Lead Free Wire Solder

Grade 99C.
99% tin, 1% copper. Suitable for plumbing use on potable water systems. 3.25mm diameter. Melting range of 227 - 240C. Available in 250g and 500g.

Powerflow Lead Free Wire Solder 3.25mm

Adcola Replacement Soldering Tips

For use with K2000, K4000, 101, 151 & 444.

Adiron Soldering Tips

Senator® Butane Soldering Iron Tips

For use with Senator® Butane Soldering Irons.



Must be used with the interchangeable tip holder SEN-516-2200K.

Butane Soldering Kit

Impact resistant plastic case with shock absorbing high density foam inlay. Contains the Pro 50 butane powered soldering torch. Pointed soldering tip, hot knife tip, blow torch tip and heat blower tip, coil of 60/40 resin cored solder and tip cleaning pad. Supplied without butane.

Fume Hood

Designed for extracting fumes from work area by passing them through a carbon sponge filter. The unit has built in lighting controlled from an individual switch. Lightweight metal construction which clamps to desired work top or table. Fully adjustable both in height and reach. Voltage: 220/230V. Maximum height: 530mm. Maximum reach: 515mm.

Kennedy® Butane Soldering Iron

BS050
Flint type ignition which is built into the cap. Uses standard butane lighter fuel and is simple to refill. Fully adjustable tip temperature control with a safety fuel cut-off when cap is replaced. Textured anti-slip barrel. Supplied with pointed soldering tip. Can be used with double flat, hot air, flame and hot knife, can also be used as a blow torch. Supplied without fuel.

Power rating: 50W.
Soldering temperature: 375°C.
Run time: 60 minutes.
Overall length with cap: 195mm.
Overall length with soldering tip: 180mm.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS125 soldering iron.

Fume Hood

Designed for extracting fumes from work area by passing them through a carbon sponge filter. The unit has built in lighting controlled from an individual switch. Lightweight metal construction which clamps to desired work top or table. Fully adjustable both in height and reach. Voltage: 220/230V. Maximum height: 530mm. Maximum reach: 515mm.