Kennedy® Butane Soldering Tool

Piezo self ignition. Uses standard butane lighter fuel and is simple to refill. Fully adjustable tip temperature control with a safety fuel cut-off when cap is replaced. Textured anti-slip barrel with built in stand for anti roll. Supplied with pointed soldering tip. Can be used with double flat, hot air, flame and hot knife, can also be used as a blow torch. Supplied without fuel.

Power rating: 50W.
Soldering temperature: 375°C.
Run time: 60 minutes.
Overall length with cap: 195mm.
Overall length with soldering tip: 180mm.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS050 soldering iron.

Kennedy® Soldering Irons

Thermo-plastic handles, designed for comfort and a firm safe grip. The mains lead is held by a cable clamping screw which eliminates the strain on electrical connections. All supplied complete with a double flat nickel plated tip and 13 amp 3-pin plug with 1.5m power lead as standard. Manufactured to BS 3456. All 230V.

40 Watt Soldering Iron

Medium duty soldering iron for most general soldering where a little more power is required.

Kennedy® Soldering Irons

Thermo-plastic handles, designed for comfort and a firm safe grip. The mains lead is held by a cable clamping screw which eliminates the strain on electrical connections. All supplied complete with a double flat nickel plated tip and 13 amp 3-pin plug with 1.5m power lead as standard. Manufactured to BS 3456. All 230V.

25 Watt Soldering Iron

An all-purpose soldering iron for general electrical repairs in the workshop.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS075 soldering iron.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS125 soldering iron.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS125 soldering iron.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS125 soldering iron.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS050 soldering iron.

Kennedy® Val-U-Vac Desoldering Tools

Removal of molten solder is achieved by the spring loaded piston creating a vacuum in the barrel of the tool. Both models have extraction springs located outside of the vacuum chamber and PTFE nozzles to prevent solder sticking. With safety shield. Nozzle size: 3mm OD x 1.5mm ID x 20mm long.

Professional Desoldering Tool DSGPRM

With a robust anodised aluminium body and steel plunger suitable for professional use. Removal of molten solder is achieved by the spring loaded piston creating a vacuum in the barrel of the tool. With extraction spring located outside of the vacuum chamber and PTFE nozzle to prevent solder sticking. With safety shield. Nozzle size: 3mm OD x 1.5mm ID x 20mm long.