Fry Bakers Soldering Fluid No.3

A specially formulated liquid flux that is ideal for soldering and tinning of copper and tinned materials. Easy to apply. Fast acting economical in use, ensuring sound strong joints. For clean, positive joint preparation. For tinned materials and copper. Available in 125ml, 250ml and 10ltr tins.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS125 soldering iron.

Kennedy® Butane Soldering Iron

BS050
Flint type ignition which is built into the cap. Uses standard butane lighter fuel and is simple to refill. Fully adjustable tip temperature control with a safety fuel cut-off when cap is replaced. Textured anti-slip barrel. Supplied with pointed soldering tip. Can be used with double flat, hot air, flame and hot knife, can also be used as a blow torch. Supplied without fuel.

Power rating: 50W.
Soldering temperature: 375°C.
Run time: 60 minutes.
Overall length with cap: 195mm.
Overall length with soldering tip: 180mm.

Fry Powerflow Lead Free Wire Solder

Grade 99C.
99% tin, 1% copper. Suitable for plumbing use on potable water systems. 3.25mm diameter. Melting range of 227 - 240C. Available in 250g and 500g.

Powerflow Lead Free Wire Solder 3.25mm

Easy-flo? Flux Powder

Easy-flo Flux Powder is Johnson Mattheys leading brand brazing flux. It is sold widely throughout the world and is recognised as one of the best flux powders available. It is very fluid at the bottom end of its working range resulting in early and extensive flux spread. This ensures that the joint surfaces are well protected from oxidation at the earliest possible point of the brazing operation. This high level of fluidity also helps to reduce flux voids/entrapment in the joint, the low viscosity of the flux aiding its displacement by the brazing filler metal from the joint gap. Easy-flo Flux Powder has a working range of 550-800C. It is suitable for use with silver brazing filler metals melting below 750C (such as Silver-flo, Easy-flo and Argo-braze filler metals).

Easy-flo Flux Powder has excellent hot rodding characteristics and adheres well to a warmed brazing rod allowing flux to be transferred to the joint area via the rod. This characteristic has made Easy-flo Flux Powder very popular in hand brazing operations where the time to produce a brazed component is crucial.

Soldering Iron Replacement Tips

Double Flat Tip for 15W and 25W soldering irons.
Tip size: 3.0mm.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS125 soldering iron.

Soldering Iron Replacement Tips

45° Offset Double Flat Tip for 40W soldering iron.
Tip size: 6.0mm.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS050 soldering iron.

Replacement Heavy Duty Soldering Tips

For use with PRO 100/PRO 120. Manufactured from copper stock, iron and nickel plated before finally 'tinned', ready for use.