Spare Nozzles for Desoldering Tool DSGPRM (KEN-516-8500K)

Pack of 5

600 Series Soldering Stations

Bench or wall mounting. All supplied with stand incorporating sponge & accessory holder.

660-TC

Standard temperature controlled with a thumb wheel potentiometer setting. Supplied with 50W soldering iron.

Soldering Irons

Designed for use on printed circuit boards and micro-electric soldering SMD and generally in the electronics industry. Lightweight design with a shim retained tip to prevent seizure. The K series iron is designed so that an efficient heat flow is maintained to the tip, while the handle stays cool.

K1000

Rated 380C (700F). Tip diameter 4.75mm (3/16"). Supplied with 5937 Adiron tip. Wattage Equivalent: 15.

Safety Stands

For "K" series soldering irons. Cast alloy rubber base - 125 x 76 x 25mm and spring length - 100mm. Supplied with sponge. S1. For use with K1000, K2000 & K4000 series.S2. For use with K3000 series.

Easy-flo? Flux Powder

Easy-flo Flux Powder is Johnson Mattheys leading brand brazing flux. It is sold widely throughout the world and is recognised as one of the best flux powders available. It is very fluid at the bottom end of its working range resulting in early and extensive flux spread. This ensures that the joint surfaces are well protected from oxidation at the earliest possible point of the brazing operation. This high level of fluidity also helps to reduce flux voids/entrapment in the joint, the low viscosity of the flux aiding its displacement by the brazing filler metal from the joint gap. Easy-flo Flux Powder has a working range of 550-800C. It is suitable for use with silver brazing filler metals melting below 750C (such as Silver-flo, Easy-flo and Argo-braze filler metals).

Easy-flo Flux Powder has excellent hot rodding characteristics and adheres well to a warmed brazing rod allowing flux to be transferred to the joint area via the rod. This characteristic has made Easy-flo Flux Powder very popular in hand brazing operations where the time to produce a brazed component is crucial.

Tin/Lead Alloy Multicore Solder

60% Tin, 40% Lead. Suitable for general purpose electrical work. Supplied on reels. Melting range 183 - 188C. With 5 core 362 flux.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS075 soldering iron.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS050 soldering iron.

Frysol A8 Stainless Steel Flux 1Ltr

Frysol A8 is a unique blend of chemicals developed to enable efficient soft soldering to metals such as stainless steels. These metals are difficult to solder due to the tough chromic oxide layer, which is present on the surface of the steel alloys. The free acid within Frysol A8 flux removes these oxides, thus producing a clean surface for the solder to wet.
This product has a shelf life of 36 months from the date of manufacture.

600 Series Soldering Stations

Bench or wall mounting. All supplied with stand incorporating sponge & accessory holder.

690-SD

Temperature controlled with a digital C or F readout. 2 lockable memory settings with PIN number security. Supplied with 50W soldering iron.