Safety Stands

For "K" series soldering irons. Cast alloy rubber base - 125 x 76 x 25mm and spring length - 100mm. Supplied with sponge. S1. For use with K1000, K2000 & K4000 series.S2. For use with K3000 series.

Copper Alloy Solder

2% silver, 91.7% copper. Melting range 644-825C. Conforms to CP105-CP2.

Silbralloy?

Butane Soldering Torch - Heavy Duty Rework Kit

A more comprehensive kit for the repair and maintenance of most electrical and electronic soldered assemblies, in the most remote environments. Contains: solder PRO 120 butane powered soldering torch with 2.4mm chisel tip, professional metal bodied desolder pump, precision side cutter(insulated), 1mm chisel tip, 5mm diameter hot air blower tip, gas torch tip, coil of 60/40 cored solder, two metal trays, flux, moulded stand and user manual. Supplied in a metal box with hammer paint finish and chrome plated snap latches.

Kennedy® Butane Soldering Tool Kit

Supplied in a robust plastic case with inlay.
Contents:
BS050 butane soldering iron, tip cleaning sponge, stand, four interchangeable tips: 4.8mm and 3.0mm, double flat, hot knife.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS125 soldering iron.

Adcola Replacement Soldering Tips

For XS & X25 Series.

Tips Suitable For Antex Tools - Adiron Tips

Replacement Heavy Duty Soldering Tips

For use with PRO 100/PRO 120. Manufactured from copper stock, iron and nickel plated before finally 'tinned', ready for use.

Butane Soldering Torch - Heavy Duty

A heavy duty powerful heat tool with self ignition for one handed operation, butane powered simple to refill. The gas fuel level can be seen clearly in the transparent 38ml tank. Machined aluminium barrel with anti-roll flat on handle, to prevent rolling when not in use. Fully adjustable tip temperature control. Supplied with pointed soldering tip. Makes this tool capable of soft soldering, brazing, sweating and heat expansion of seized fasteners. Protective case with auto gas shut off. Can be used with hot knife, gas torch and deflector tips. Supplied without butane.
Power rating: 30W to 125W
Soldering temperature: 250C to 550C
Maximum temperature: 1300C
Run time: 200 minutes (full tank of fuel at mid heat level setting)
Overall length with cap: 254mm
Overall length with soldering tip: 245mm
Overall length with torch tip: 172mm

Antex Spares and Accessories

Solder Tips for CS Irons.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS075 soldering iron.