Kennedy® Butane Soldering Tool

BS125
Piezo self ignition. Uses standard butane lighter fuel and is simple to refill. Fully adjustable tip temperature control with a safety fuel cut-off when cap is replaced. Textured anti-slip barrel with built in stand for anti roll. Supplied with pointed soldering tip. Can be used with single flat, double flat, hot air, hot air deflector and hot knife, can also be used as a blow torch. Supplied without fuel.

Power rating: 25W to 125W.
Soldering temperature: 580°C to 1300°C.
Run time: 60 minutes.
Overall length with cap: 235mm.
Overall length with soldering tip: 230mm.

Kennedy® Soldering Irons

Thermo-plastic handles, designed for comfort and a firm safe grip. The mains lead is held by a cable clamping screw which eliminates the strain on electrical connections. All supplied complete with a double flat nickel plated tip and 13 amp 3-pin plug with 1.5m power lead as standard. Manufactured to BS 3456. All 230V.

15 Watts Fine Duty.

For light duty electrical repairs and fine electronics work.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS075 soldering iron.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS075 soldering iron.

Monument Tools Soldering/Brazing Mats

Prevents burn damage to the surrounding area when soldering. Resistant to temperatures up to 600°C and does not present any of the hazards associated with asbestos materials. Available in 2 sizes: 250 x 250mm and 300 x 300mm.

Monument Tools Soldering/Brazing Mats

Prevents burn damage to the surrounding area when soldering. Resistant to temperatures up to 600°C and does not present any of the hazards associated with asbestos materials. Available in 2 sizes: 250 x 250mm and 300 x 300mm.

Tin/Lead Alloy Multicore Solder

60% Tin, 40% Lead. Suitable for general purpose electrical work. Supplied on reels. Melting range 183 - 188C. With 5 core 362 flux.

Lead Free Multicore Solder

With 5 core Ersin non-corrosive flux. Multi-purpose, non-corrosive solder ideal for electrical joints, for stainless steel, brass, copper, silver, aluminium. Melting range of 227 - 240C MX100: Cartridge (10g net). MX200: Reel (30g net).

Tin/Lead Alloy Multicore Solder

60% Tin, 40% Lead. Suitable for general purpose electrical work. Supplied on reels. Melting range 183 - 188C. With 5 core 362 flux.

SavBit Multicore Solder Dispenser

Special alloy solder. For all electrical work. Enables fine copper wires to be soldered more efficiently. Reduces tip corrosion. With 5 core Ersin non-corrosive, low residue flux. Melting range of 182 - 215C. Diameter 1.2mm.