Araldite 2011 - Multi Purpose Epoxy - Long working Life

Room temperature curing, high strength and toughness. Versatile and excellent resistance to dynamic loading. Ideal for large areas of bonding and/or a long working time. Ideal for Ferrous metals, aluminium, copper, zinc and galvanised metal, Polyamides, Polystyrene Foams, PU foams, ceramics, wood etc. Light handling strength at 7 hours.

Mixing Nozzles

For all Araldite 50ml & 200ml cartridges. Ensure accurate mixing and application.

2701* Studlock Threadlocker

To replace interference studs etc. Also removes the need for blind holes for studs in oil filled castings. Requires light torque for removal. *Replaces 270.

Loctite 4062 - Instant Adhesive / Ultra Fast Curing

Ideal for highest speed bonding of plastic, Metal and rubber. Use with 770 polyolefin primer for difficult to bond plastics. Perfect for bonding material to lampshade frames, bonding small plastic ornaments/symbols to plastic base, rubber strips to clamp faces, rubber end pieces to plastic tubes and high strength locking of plastic fasteners. Replaces 420 and 493.



Ideal for highest speed bonding of plastic, metal and rubber. Use with 770 polyolefin primer for difficult to bond plastics. Perfect for bonding material to lampshade frames, bonding small plastic ornaments/symbols to plastic base, rubber strips to clamp faces, rubber end pieces to plastic tubes and high strength locking of plastic fasteners. Replaces 420 and 493.
Specifications: Operating Temperature: up to 80°C.
Fixture Time (on steel): 3-20sec.
Viscosity mPa.s: 2.
Especially for Metal/Plastics.

Loctite Power Flex Super Glue Gel 3gm

A non-drip adhesive specially formulated with rubber, for applications requiring some flexibilty and shock resistance. Ideal for overhead bonding, vertical and porus surfaces. Water resistant.

Toughened Epoxy

Good gap fill. High peel strength. Fixture time 4 hours.

Hysol 9461

Loctite 4062 - Instant Adhesive / Ultra Fast Curing

Ideal for highest speed bonding of plastic, metal and rubber. Use with 770 polyolefin primer for difficult to bond plastics. Perfect for bonding material to lampshade frames, bonding small plastic ornaments/symbols to plastic base, rubber strips to clamp faces, rubber end pieces to plastic tubes and high strength locking of plastic fasteners. Replaces 420 and 493. Available in 20g or 50g.

Specifications: operating temperature up to 80°C.
Fixture time (on steel): 3-20sec.
Viscosity mPa.s: 2.
Especially for metal/plastics.

Araldite 2021 - Rapid Curing, Toughened Multi-Purpose Methacrylate.

High shear and peel strengths. Very fast curing, good gap filling properties. Suitable for service at temperatures up to 200 deg C. Ideal for ferrous metals, aluminium, ABS / PVC, Acrylics, Polycarbonate, Polyamides, Polystyrene Foams, PU foams etc. Light handling 4 minutes.
Size: 380ml.

Araldite 2014 - High Chemical and Temperature Resistance Epoxy Paste

Gap filling properties. Non sagging up to 5 mm thickness. Low out gassing/volatile loss. Temperature resistant to 120 deg C. Ideal for metals, electronic components, GRP structures etc. Light handling strength at 3 1/2 hours.

Sticks Like Sh*t All Weather Adhesive

Evo-Stik Sticks Like Sh*T is a high performance, single component, moisture curing, Modified Silane (MS) Polymer based. It will bond most surfaces even if both are impervious. The product will bond damp surfaces and may even be used underwater. It has very low odour, cures to form a hard elastic rubber, with almost no shrinkage and low hazard; it does not contain any water or solvent, making itideal for bonding foam polystyrene sheets. When fully cured the product may be painted with most types of paint.