7386 - Multi-bond Activator

This activator is designed to promote the cure of Loctite toughened acrylic adhesives Multi-bond 329 and 330.

Araldite 2-Part Adhesive

Repairs metal, wood, masonry, ceramics, glass and most plastics. Oil, heat and cold resistant with a good chemical resistance. Fills uneven cracks and withstands rough handling.

Precision

Slow setting and is repositional for up to 2 hours ('Rapid Cure' pack illustrated).

Loctite 225, Low strength, Threadlocking Compound

Loctite 225, Low strength, High Viscosity Threadlocking Compound

Scotch-Weld 9323 Extreme Strength Epoxy Adhesive

Two part room temperature curing adhesive. Extremely high strength. Toughened epoxy system with good elevated temperature resistance. High environmental resistance. Mixed adhesive is thixotropic for ease of application. High impact resistance.

Safe 80 Water Based Contact Adhesive

Used for bonding most types of materials such as textiles, rubbers and plastic laminates to wood, plywood, chipboard etc. It may also be used for bonding smooth porous surfaces of concrete or plaster as well as canvas and expanded polystyrene.

Loctite 9466 A+B Dual Cartridge

Loctite Hysol 9466 A&B is a toughened, 2K-Epoxy adhesive, suitable for multi purpose applications requiring long open time and high bonding strength. Ideal for a wide variety of substrates like metals, ceramic and most plastics.

Working time: 60min.
Fixture time: 180min.
Viscosity in Pa-s: 35.
Tensile strength: 32N/mm².
Peel strength: 8N/mm.
Service temperature range: -55°C - +120°C.
Colour mix: off-white.
Pack sizes: 50ml, 400ml.

All Purpose Waterproof Wood Adhesive

All-purpose waterproof wood adhesive is a high quality, resin based wood adhesive for all wood bonding. It can be used internally and externally and provides a high strength, impact resistant bond that is usually stronger than the wood itself. Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use. Dries clear. Fast cure, initial set in just 10 minutes. Conforms to the international standard EN 204 (D3) and BS 4071 for creep resistance.

Araldite 2011 - Multi Purpose Epoxy - Long working Life

Room temperature curing, high strength and toughness. Versatile and excellent resistance to dynamic loading. Ideal for large areas of bonding and/or a long working time. Ideal for Ferrous metals, aluminium, copper, zinc and galvanised metal, Polyamides, Polystyrene Foams, PU foams, ceramics, wood etc. Light handling strength at 7 hours.

Mixing Nozzles

For all Araldite 50ml & 200ml cartridges. Ensure accurate mixing and application.

Loctite 401 - General-Purpose Instant Adhesive

For bonding ceramics, aluminium, steel, leather, fabric and paper in seconds. Maximum operating temperature: 120°C. NSF P1 registered. Available in 3g, 20g and 50g.