Adhesive Spray

A fast tacking, non-chlorinated spray adhesive. This specialist formulation will provide instant ‘grab’, which allows pressure to be exerted on the bond before full cure strength is achieved. Quick stick - provides instant grab. Provides permanent bonds Free from chlorinated solvents. Tack time approximately 30 seconds. Economical in use - only a light film is required for instant grab. QS 900 Quick Stick Adhesive has been formulated to satisfy the demands of the carpeting and flooring trade. It is also suitable for bonding many different substrates, including:- Carpet, Underlay, Foam, Fabric, Cork, Upholstery, Paper, Cardboard, Wood to a wide variety of different surfaces.



Apply a light, fine even coating to both surfaces to be bonded from 9” - 12” (25 - 30 cm). Wait until the adhesive is tack-dry and bond the surfaces together using firm pressure. Heavier applications of QS 900 may prolong the tack time. N.B. May affect certain plastics. Always test a small, inconspicuous area before general use. To prevent blockages, invert the can after use and spray to clear the nozzle.

Mixing Nozzles

For all Araldite 50ml & 200ml cartridges. Ensure accurate mixing and application.

Bostik General Purpose Adhesive - 1782

Used by toy, leather goods and PVC ware manufacturers.

Epoxy Power Syringe

• Supreme strength and flexibility.
• The incredible power of a 2-part adhesive without the mixing.
• Weather and temperature resistant.
• Sets in seconds.
• 3g syringe.

Scotch-Weld EPX High Performance Epoxy Adhesive - DP490

DP490 is a black, thixotropic, gap filling epoxy adhesive with particularly good application characteristics. Designed for use where toughness and high strength are required and shows special benefits in the construction of composite assemblies. The product has excellent heat and environmental resistance.
Size: 400ml.

PVA Bond

Multi-purpose bonding agent, primer sealer, cement filler and plaster admixture. Bonds to most building and DIY materials except PVC and rubber. Conforms to BS5270. Size: 1 litre.

638* - High Strength Retainer

For heavy duty applications on cylinder liners, splines, structural tubing, drive keys etc. High viscosity. Available in 3ml, 50ml and 250ml. *Replaces 635.

Laybond Gripfill Multi-Purpose Gap Filling Adhesive

GRIPFILL is a brand leading one-part gap filling adhesive, which gives excellent adhesion and bonding strength to most solid building materials, even vertical applications. Suitable for interior and exterior use, provided the bond is covered.
Also available in Solvent Free for bonding of Polystyrene ceiling tiles, coving, foamed PVC's etc.

Artists Spray Adhesives

Permanent adhesive specifically formulated for use with photographic prints. Improved spray pattern for reduced overspray and easier application.

Photo Mount?

Scotch-Weld EPX High Performance Epoxy Adhesive - DP490

DP490 is a black, thixotropic, gap filling epoxy adhesive with particularly good application characteristics. Designed for use where toughness and high strength are required and shows special benefits in the construction of composite assemblies. The product has excellent heat and environmental resistance.
Size: 400ml.