Adhesive Spray

A fast tacking, non-chlorinated spray adhesive. This specialist formulation will provide instant ‘grab’, which allows pressure to be exerted on the bond before full cure strength is achieved. Quick stick - provides instant grab. Provides permanent bonds Free from chlorinated solvents. Tack time approximately 30 seconds. Economical in use - only a light film is required for instant grab. QS 900 Quick Stick Adhesive has been formulated to satisfy the demands of the carpeting and flooring trade. It is also suitable for bonding many different substrates, including:- Carpet, Underlay, Foam, Fabric, Cork, Upholstery, Paper, Cardboard, Wood to a wide variety of different surfaces.



Apply a light, fine even coating to both surfaces to be bonded from 9” - 12” (25 - 30 cm). Wait until the adhesive is tack-dry and bond the surfaces together using firm pressure. Heavier applications of QS 900 may prolong the tack time. N.B. May affect certain plastics. Always test a small, inconspicuous area before general use. To prevent blockages, invert the can after use and spray to clear the nozzle.

Araldite 2012 - Multi Purpose Epoxy - Very Fast Cure

Room temperature curing, high strength and peel strength. Multi purpose, versatile with rapid cure. Ideal for Ferrous metals, aluminium, copper, zinc and galvanised metal, rubbers and wood etc. Light handling 20 mins.

Araldite 2012 - Multi Purpose Epoxy - Very Fast Cure

Room temperature curing, high strength and peel strength. Multi purpose, versatile with rapid cure. Ideal for Ferrous metals, aluminium, copper, zinc and galvanised metal, rubbers and wood etc. Light handling 20 mins.

Araldite 2010 - General Purpose Epoxy - Fast Cure

Room temperature curing, high shear & peel strength. Particularly suitable for applications requiring a tough and resilient bond. Fast cure / different substrates. Ideal for ferrous metals, aluminium, copper, rubbers, rigid plastics and ceramics etc. Light handling strength at 30 mins.

Araldite 2012 - Multi Purpose Epoxy - Very Fast Cure

Room temperature curing, high strength and peel strength. Multi purpose, versatile with rapid cure. Ideal for Ferrous metals, aluminium, copper, zinc and galvanised metal, rubbers and wood etc. Light handling 20 mins.

Araldite 2011 - Multi Purpose Epoxy - Long working Life

Room temperature curing, high strength and toughness. Versatile and excellent resistance to dynamic loading. Ideal for large areas of bonding and/or a long working time. Ideal for Ferrous metals, aluminium, copper, zinc and galvanised metal, Polyamides, Polystyrene Foams, PU foams, ceramics, wood etc. Light handling strength at 7 hours.

Mixing Nozzles

For all Araldite 50ml & 200ml cartridges. Ensure accurate mixing and application.

Araldite 2021 - Rapid Curing, Toughened Multi-Purpose Methacrylate.

High shear and peel strengths. Very fast curing, good gap filling properties. Suitable for service at temperatures up to 200 deg C. Ideal for ferrous metals, aluminium, ABS / PVC, Acrylics, Polycarbonate, Polyamides, Polystyrene Foams, PU foams etc. Light handling 4 minutes.
Size: 380ml.

Araldite 2014 - High Chemical and Temperature Resistance Epoxy Paste

Gap filling properties. Non sagging up to 5 mm thickness. Low out gassing/volatile loss. Temperature resistant to 120 deg C. Ideal for metals, electronic components, GRP structures etc. Light handling strength at 3 1/2 hours.

Araldite 2012 - Multi Purpose Epoxy - Very Fast Cure

Room temperature curing, high strength and peel strength. Multi purpose, versatile with rapid cure. Ideal for Ferrous metals, aluminium, copper, zinc and galvanised metal, rubbers and wood etc. Light handling 20 mins.