Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Satin Chrome Finished Frame

Designed for measuring grooves, recesses and shoulders located inside a bore. They measure not only thickness and spacing of grooves, but also measure from an edge to a land, or from shoulder to groove. Spindle hardened and precision ground, with micro-lap finish on measuring face. Every thousandth is numbered for easy reading. To measure: Width of groove, Width of Land. To determine: Location of Groove, Depth of bottom of groove. Accuracy: Parallelism: 10 mu m. Instrument Error: /-10 mu m. Graduation: 0.01mm 0.001"

Series 146

Interchangeable Rod Type

These are lightweight, well balanced and rigid. Satin-chrome finish with hardened, ground and lapped measuring screw. Each micrometer of less than 300mm (12") is supplied with convenient handle to reach into deep holes. The set also includes spacing collar, a series of precision measuring rods and a dull chrome plated micrometer head. Spacing collars are designed for making up for the limited stroke of the micrometer head. Each rod marked with length. Easily reset - adjustment positive and permanent. Anvil is made from high grade steel, hardened, precision ground, micro-lapped and adjustable. Spanner wrench supplied with each micrometer. Accuracy: Instrument Error: /-(6L/50) mu m; L maximum measuring length

Series 141

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Disc Micrometers - Enamelled Frame

For measuring a displacement over a given number of gear teeth, closely spaced sections, ribs, keys and fins etc. Measurable gear pitch: 0.5-6 module. Graduation: 0.01mm (.001"). Accuracy: Parallelism: 0-50mm 4 mu m, 50-100mm (4L/50) mu m. Flatness: 1 mu m. Instrument Error: 0-50mm /-4 mu m, 50-100mm /-6 mu m. L maximum measuring length

123 Series

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Screw Thread Micrometer

Interchangeable V-anvils allow various pitches to be measured with a single micrometer. With ratchet stop. Accuracy: 0-75mm /-4 mu m, 75-100mm /-5 mu m. Anvils supplied separately.

126 Series