Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Satin Chrome Finished Frame

Designed for measuring grooves, recesses and shoulders located inside a bore. They measure not only thickness and spacing of grooves, but also measure from an edge to a land, or from shoulder to groove. Spindle hardened and precision ground, with micro-lap finish on measuring face. Every thousandth is numbered for easy reading. To measure: Width of groove, Width of Land. To determine: Location of Groove, Depth of bottom of groove. Accuracy: Parallelism: 10 mu m. Instrument Error: /-10 mu m. Graduation: 0.01mm 0.001"

Series 146

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Mechanical Tube Micrometers - Enamelled Frame

For measuring wall thickness, collars, tubing etc. checking dimensions from inside holes to outside edges. Measuring faces are carbide tipped, anvil and spindle are hardened, precision ground and micro-lap finished. Glare-free satin chrome sleeve and thimble, ratchet stop and positive locking clamp. Instrument Error: /-3mm.

Series 115

One Spherical Face Type

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)