Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Interchangeable Rod Type

These are lightweight, well balanced and rigid. Satin-chrome finish with hardened, ground and lapped measuring screw. Each micrometer of less than 300mm (12") is supplied with convenient handle to reach into deep holes. The set also includes spacing collar, a series of precision measuring rods and a dull chrome plated micrometer head. Spacing collars are designed for making up for the limited stroke of the micrometer head. Each rod marked with length. Easily reset - adjustment positive and permanent. Anvil is made from high grade steel, hardened, precision ground, micro-lapped and adjustable. Spanner wrench supplied with each micrometer. Accuracy: Instrument Error: /-(6L/50) mu m; L maximum measuring length

Series 141

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Blade Micrometers - Satin Chrome Finished Frame

For the measurement of narrow grooves in forming tools, shaft diameters, keyways, splines, etc. The spindle is non-rotating, the anvils hardened and precision lapped. Made of forged steel the frame is fitted with heat plates. The sleeve and thimble are satin finished. Blade thickness: 0.030" (0.75mm). Measuring Depth: 0.25" (6.5mm). Parallelism: 0.00012"/3mm up to 2"/50mm. (3L/100)mm, (0.000120.00004L/4)" for models over 2"/50mm. Graduation: 0.0001" (0.01mm). Blade dimensions: a: 0.256" (6.5mm), b: 0.236" (6mm), c: 0.030" (0.75mm). Accuracy: /-3mm for up to 75mm, /-4mm for 75-100mm

122 Series

Accuracy:
3mm for up to 75mm.
4mm for 75 - 100mm.

Screw Thread Micrometer

Interchangeable V-anvils allow various pitches to be measured with a single micrometer. With ratchet stop. Accuracy: 0-75mm /-4 mu m, 75-100mm /-5 mu m. Anvils supplied separately.

126 Series

Interchangeable Rod Type

These are lightweight, well balanced and rigid. Satin-chrome finish with hardened, ground and lapped measuring screw. Each micrometer of less than 300mm (12") is supplied with convenient handle to reach into deep holes. The set also includes spacing collar, a series of precision measuring rods and a dull chrome plated micrometer head. Spacing collars are designed for making up for the limited stroke of the micrometer head. Each rod marked with length. Easily reset - adjustment positive and permanent. Anvil is made from high grade steel, hardened, precision ground, micro-lapped and adjustable. Spanner wrench supplied with each micrometer. Accuracy: Instrument Error: /-(6L/50) mu m; L maximum measuring length

Series 141

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Micrometer Heads

Standard end, spherical end & reverse reading.
Accuracy:
Metric: ±2µm. Graduation: 0.01mm.
Imperial: ±0.0001". Graduation: 0.001".

Series 148

External Micrometers with Heat Shield

Tapered (on anvil side) for hard to reach places. Supplied without measuring standards. Tungsten Carbide tipped anvils. Accuracy: Flatness: 0.6 mu m for 0.01mm (0.001") graduation, 0.3 mu m for 0.001mm (0.0001") graduation. Parallelism: 1 mu m for 0-25mm (0-1") Models, 2 mu m for 25-50mm (1-2") Models. Instrument Error: /-2 mu m.

102 Series