Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Point Micrometers - Enamelled Frame

With 15 or 30 Pointed Anvils (0.3mm Point Radius), for measuring in areas of restricted access. Quick and easy wear adjustment, positive locking clamp and ratchet stop. Accuracy: Parallelism: 3 mu m. Instrument Error: (2L/75) mu m (fraction rounded up). Graduation: 0.001" (0.01mm) L Maximum measuring length. 1"/25mm 55.3mm, 2"/50mm 80.3mm

112 Series

Tubular Extension Sets - Pipe Type

Each set consists of inside micrometer head and a series of extension pipes of different length, which are hardened, ground, micro-lapped and heat insulated. Satin chrome finished head with positive locking clamp and carbide measuring faces. All sets include micrometer head. Accuracy: Micrometer head stroke: 25mm (1"). Graduation: 0.01mm (.001"). Instrument Error: /-(3qty of rod L/50) mu m. L Maximum measuring length

Series 139

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Screw Thread Micrometer

Interchangeable V-anvils allow various pitches to be measured with a single micrometer. With ratchet stop. Accuracy: 0-75mm /-4 mu m, 75-100mm /-5 mu m. Anvils supplied separately.

126 Series

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Mechanical Tube Micrometers - Enamelled Frame

For measuring wall thickness, collars, tubing etc. checking dimensions from inside holes to outside edges. Measuring faces are carbide tipped, anvil and spindle are hardened, precision ground and micro-lap finished. Glare-free satin chrome sleeve and thimble, ratchet stop and positive locking clamp. Instrument Error: /-3mm.

Series 115

One Spherical Face Type

External Micrometers with Heat Shield

Tapered (on anvil side) for hard to reach places. Supplied without measuring standards. Tungsten Carbide tipped anvils. Accuracy:
Flatness: 0.6 mu m for 0.01mm (0.001") graduation,
0.3 mu m for 0.001mm (0.0001") graduation.
Parallelism: 1 mu m for 0-25mm (0-1") Models, 2 mu m for 25-50mm (1-2") Models.
Instrument Error: /-2 mu m.