Model D330x1000, 0340-1007 3ph, 0340-1006 1ph

Rigid heavily ribbed, hardened and precision ground cast iron bed with V guideways. Camlock spindle nose D1-4. Hardened oil running headstock spindle with high precision, realignable tapered bearings. Guaranteed spindle nose runout less than 0.015mm. Closed quick action feed and screw cutting gears running in oil bath. Simultaneous engagement of lead screw & power feed levers is prevented by interlocking. Adjustable slip clutch of lead screw. Forward/reverse spindle switch. Safety switch with no-volt release, emergency stop and motor protection. Foot brake. Gap bed. Manufactured to DIN 8606 (Toolmakers Precision).

Specifications:
Centre height: 165mm.
Max swing over bed: 330mm.
Max swing over saddle: 198mm.
Max swing in gap: 476mm.
Length of gap: 115mm.
Distance between centres: 1000mm.
Width of bed: 187mm.
Spindle bore: 38mm.
Spindle nose: D1-4.
Spindle taper: MT 5.
Tailstock taper: MT 3.
No of spindle speeds: 8.
Range of spindle speeds: 70?2000rpm.
Leadscrew dia/pitch: 22mm, 3mm.
Cross feed: 0.033 ? 0.933mm/rev.
Longitudinal feed: 0.097 ? 2.713mm/rev.
Metric threads: 0.4 ? 7mm.
Imperial threads: 4 ? 56tpi.
Diametral threads: 8 ? 120dp.
Module threads: 0.2 ? 3.5mp.
Top slide travel: 85mm.
Cross slide travel: 170mm.
Motor power: 1.5kW.
Tool section: 16mm.
Size (LxWxH): 193 x 75 x 151cm.
Net weight: 600kg.

TGL-YCM-085

TGL-YCM-085
Adjustable left cutting angle from 0° to 45°. Blade tensioning device. Base with integrated vice. Cuts without lubrication. Powerful 850W, digital variable speed motor with noise reduction system for very quiet operation. Anti-reset safety function and ergonomic hand-grip.

Technical Data
Motor: 850W - 240V.
Blade size: 1330 x 13 x 0.65mm.
Capacity: @90° 85mm @45° 60mm.
Blade variable speed: 30 ~ 80m/min.
Dimensions (L x W x H): 680 x 290 x 480mm.
Weight: 19kg.

Ajax Machine Tools

The Ajax range of belt driven drilling machines encompasses, 1 bench model AJBM20A and 2 pedestal models AJPM20A and AJPM32A.
Available in both 230V 1pH 50/60Hz and 400V 3pH 50/60Hz.

Standard equipment
Keyless drill chuck.
Digital readout for drilling depth.
Interlocked belt guard.
Machine light.
AJPM32A includes machine vice.

Bench Drills

AJBM20A Specification:
Bench Mounted.
Belt Driven.
Chuck Capacity: 16mm
Drilling Capacity: 20mm
Spindle Travel: 85mm
Throat Depth: 180mm
Spindle Size: MT2
Table Size: 305x305mm
No. of Speeds: 12
Speed: 280-2380rpm

Available as:
230V/1pH Order Code: AJX-271-2420Y
400/3pH Order Code: AJX-271-2420X

Vario Optimum Drill/Mill Tilting Head - Variable Speed

BF20 Vario
Extremely stable drilling-milling machine for a precise, fast and secure fabrication. Infinite drive with electronic regulation and digital sleeve travel indicator included. Digital Quill travel indicator, precision of reading 0.01mm, mm/inch conversion.



Features:
Sturdy and precision dovetail slide way with adjustable tapered gibs. Infinitely variable drive with electronic regulation. Dynamic regulation of revolutions from 100 to 3,000rpm. Easy and clear operation thanks to individually adjustable control panel. Automatic off-switch for easy operation, with under voltage circuit breaker, right-left hand rotation. Cam controlled. Infinitely variable speed adjustment. Digital sleeve travel indicator, precision of reading 0.01mm. Positive clamping of the spindle sleeve in the drill head. Integrated work table, table illumination. High concentricity precision 0.01mm measured in the spindle sleeve. Expanding bellows as guide protection. Two stage gear transmission making excessive motor power unnecessary. D.C. motor with permanent speed monitoring. The drill head can be swivelled plus/minus 90 thus permitting milling and drilling operations in any angular position. Fine crossfeed of spindle sleeve when milling. Spindle sleeve feed via stargrip (drilling). Upright can be displaced laterally to enable longer travels and centred machining of the work piece on the cross table even when the head has been swivelled. Adjustable end stops. Feed spindles can be adjusted without clearance thanks to adjustable spindle nuts.

Specifications:
Drilling capacity (max): 16mm.
Milling cap. of inserted tooth cutter (max): 63mm.
Milling cap. of end mill cutter (max): 20mm.
Throat depth: 185mm.
Spindle holding fixture: 2MT/M10.
Spindle speeds: 100-3000rpm.
Spindle travel: 50mm.
T slot size: 12mm.
Table size: 500x180mm.
Z Travel: 280mm.
Y Travel: 175mm.
X Travel: 280mm.
Motor: 50Hz 850W.
Dimensions (LxWxH): 670x550x860mm.
Net weight: 103kgs.

Standard Accessories
Drawbar M10.
Work table illumination.
Digital sleeve travel indicator.

Kobe Bench Pillar Drills

Kobe bench pillar drills are suitable for workshop and light industrial applications. Supplied complete with laser light drilling guide, that helps improve accuracy on repeat drilling operations and a adjustable height and angle machine table for securely clamping the work piece to.

Available as a:
5 Speed 350W bench drill, order code: KBE-271-2030K.
12 Speed 500W bench drill, order code: KBE-271-2110K.

DPB350 Bench Mounted Pillar Drill 5spd 350W

Kobe? DPB350 Bench Mounted Pillar Drill specification:

Chuck capacity: 13mm
Motor input capacity: 350W
Motor output capacity: 210W
Motor supply voltage: 230V/50hz
Laser power: DC3V <1mw
Laser wavelength: 650nm
Spindle travel: 50mm
Spindle taper:.mt2
Drilling speeds (5): 580?2650rpm
Table size: 152x170mm
C/w side plates:192mm (max272) x170mm
Base size: 320x190mm
Column diameter: 50mm
Sound power level:77.9 dBa
Sound pressure level: 64.9 dBa
Net dimensions: 720(h) x 220(w) x 455(d)mm
Net weight: 24kg
Max. Distance from spindle
Axis to surface of column: 102mm
Max. Distance from spindle
End to surface of table: 250mm

Sip Machine Tools

The Sip 300mm (12") professional metal cutting bandsaw is powered by a 750w (1hp)induction motor and is ideally suited for general workshop use.

Features include:
Adjustable vice for cutting mitre angles between 0-45°.
Cast iron bow for reduced vibration & accuracy.
Limit switch to stop machine when cutting is complete.
Blade included.

300mm (12") Metal Cutting Bandsaw - 3 Phase

01539
Supply 400V-3ph.
Motor 1hp (750w)
Speed range (4 speeds): 110/133/192/318 ft/min.
Max. blade size: (L)2360 x (W)20mm.
Mitre angle 0-45° left.
Cutting capacity @90°:
Box section 180 x 210mm,
Round section diameter: 180mm.
Cutting capacity @45°:
Box section 180 x 110mm,
Round section diameter: 110mm.
Weight 137kg.

Ajax Machine Tools

Ajax hydraulic power hacksaw machines are manufactured from a solid cast iron construction and a practical design. The machine vice swivels to allow angular cutting, the bow has infinitely variable cutting feed with automatic cut off at end of cut with rapid bow return.

The machine is complete with blade, length setting gauge, re-circulating coolant system, swarf collection tray, bar end support, bundle cutting and roller stand, fully CE marked.

Hydraulic Power Hacksaw

Model Number: AJPH280
Supply: 400V/3ph 50Hz.
Motor rating: 2hp.
Maximum cut diameter @90: 280mm.
Maximum cut diameter @45: 130mm.
Maximum cut rectangular @90: 250 x 250mm.
Blade speed: 80/100/120SPM.
Blade size: 450 x 32 x 1.6mm.
Weight: 520kg.

Heavy-Duty Vertical Bandsaws

Heavy-Duty suitable for continuous use. High quality electrics and limit switches to blade wheelcovers make safe to use and conform to CE. Air pipe keeps the visibility clear near the cutting edge

Standard Accessories:
Saw blade butt welder with integrated annealing unit.
Blade shear, grinder & built-in blade and tyre cleaning brush.
Lo-volt light.
Set of tools.
Instruction manual and parts list.
Rip fence for straight, repeated cutting and is easily adjustable for varied size.
Mitre protractor for angular cutting.

Model KV50 20? Throat 1-631-200

Cutting blade to column: 520mm.
Capacity max. work height: 310mm.
Table size: 600x500mm.
Table inclination (4 ways): 15.
Blade length: 3880mm.
Max width: 16mm.
Blade speeds stepless: Low 15-55m/min, High 96-390m/min.
Butt welder capacity: 2.4KVA 3-16mm.
Drive motor: 1.5kW.
Weight: 500kgs.

Ajax Machine Tools

The range of Ajax gear head pedestal mounted drilling machines are known for their high quality, robust design and manufactured in Europe.

The range starts at 25mm capacity up to the huge 70mm capacity machine, all gear driven heads fully immersed in oil are designed for heavy-duty and long life and total range has automatic drill ejection from spindle.

Push button control of forward/reverse spindle direction, emergency switch, interlocked drill guard, table rise and fall by rack and pinion movement, ease of speed change.

The machines have in-built low voltage lighting and are fully CE marked. 2 year warranty.

All machines from the AJ32 upwards are complete with automatic spindle feed which can be preset to a desired depth, coolant pump and piping.

Gear Head Pedestal Drill

Model No: AJ70
Drilling Capacity: 70mm
Spindle Taper: MT5
Spindle Travel: 300mm
Speed: 35-1238rpm
No. of Speeds: 12
No. of Feeds: 6
Table Size: 600x600mm
Voltage: 400V 3pH 50Hz
Main Motor: 5.5kW
Weight: 1150Kg

For all dimensional specifications please refer to our catalogue.

SIP® 12" Disc Sander

01953
230v (13amp) supply.
550W induction motor.
Heavy-duty cast iron table provides a solid work base.
Cast alloy mitre fence.
Magnetic NVR switch.
2 year warranty.