Excel Heavy-Duty Bandsaw

Micro alignment of blade through ball bearings. Dovetail slide with take up gib. Rapid approach vice. Adjustable hydraulic feed. Automatic cut off. Variable Speed: No belt change. No time wasting. Speeds up production.

Standard Accessories:
Coolant pump & accessories.
Instruction manual.

Optional Accessories:
Single roller stand 1-625-994 MSR4 4 Roller adj. stand 0335-7610.

Specifications:
Maximum capacity:
@ 90 - round 250mm, square 250 x 250mm, rectangular (H x W): 250 x 415mm.
@ 45 - round 190mm, square 190 x 190mm, rectangular (H x W): 250 x 190mm.
Vice capacity: 450mm.
Blade size: 3300 x 27 x 0.9mm.
Blade speed - stepless: 25-75m/min.
Mitre cut: 45.
Motor: 2hp.
Weight: 325kg.
Dimensions (L x W x H): 1750 x 575 x 1120mm.

Vario Optimum Drill/Mill Tilting Head - Variable Speed

BF30
Precision drilling-milling machine with infinitely variable electronic speed control and digital spindle sleeve travel display. Convincing arguments: quality, efficiency and price. Solid dovetail slideway, hand-scraped, provides for highest stability and optimum precision. Solid, precise, largely dimensioned and precisely machined surface. Heavy solid casting. Adjustable V-ledges. Very wide speed range. Infinitely variable drive. High concentricity precision due to taper roller bearings, less than 0.015 mm measured in the spindle sleeve. Gearhead plus/minus 30 rotatable. Digital spindle sleeve travel display, accuracy of the display 0.01 mm, reversible mm/inch. Drill depth stop. Special steel covering of Z-Axes. Digital speed display. Threading mode. Automatic mode.

Specifications:
Motor power: 1.5kW/230V 50Hz.
Drilling capacity in casting (max.): 35mm.
Drilling capacity in steel (max.) 30mm.
Milling capacity cutter head (max.) 75mm.
Milling capacity end mill cutter (max.): 30mm.
Working range: 220mm.
Spindle holding fixture: MK3.
Sleeve travel: 90mm.
Sleeve travel diameter: 70mm.
Draw-in rod: M12.
Head rotation: plus/minus 300.
Gear stages: 3 stages.
Z-axis travel: 470mm.
Gear stage slow: 80 - 1.100rpm.
Gear stage average: 160 - 1.700rpm.
Gear stage fast: 320 - 3.100rpm.
Cross table length x width: 750 x 210mm.
X-axis travel: 430mm.
Y-axis travel: 200mm.
Distance spindle/cross table: 470mm.
T-slot size/distance: 12mm/63mm/number 3.
Length x Width x Height: 1076 x 733 x 1108mm.
Net weight: 265kg.

Heavy-Duty Vertical Bandsaws

Heavy-Duty suitable for continuous use. High quality electrics and limit switches to blade wheelcovers make safe to use and conform to CE. Air pipe keeps the visibility clear near the cutting edge

Standard Accessories:
Saw blade butt welder with integrated annealing unit.
Blade shear, grinder & built-in blade and tyre cleaning brush.
Lo-volt light.
Set of tools.
Instruction manual and parts list.
Rip fence for straight, repeated cutting and is easily adjustable for varied size.
Mitre protractor for angular cutting.

Model KV100 100? Throat 1-631-400

Cutting blade to column: 1000mm.
Capacity max. work height: 300mm.
Table size: 600x500mm.
Table extension: 450x500mm.
Table inclination (4 ways): 15.
Blade length: 4540mm.
Max width: 16mm.
Blade speeds stepless: Low 15-55m/min, High 96-390m/min.
Butt welder capacity: 2.4KVA 3-16mm.
Drive motor: 1.5kW.
Weight: 800kgs.

Sip Machine Tools

The Sip 300mm (12") professional metal cutting bandsaw is powered by a 750w (1hp)induction motor and is ideally suited for general workshop use.

Features include:
Adjustable vice for cutting mitre angles between 0-45°.
Cast iron bow for reduced vibration & accuracy.
Limit switch to stop machine when cutting is complete.
Blade included.

300mm (12") Metal Cutting Bandsaw - 1 Phase

01528
Supply 230V-1ph.
Motor 1hp (750w)
Speed range (4 speeds): 110/133/192/318 ft/min,
Max. blade size: (L)2360 x (W)20mm.
Mitre angle 0-45° left.
Cutting capacity @90°:
Box section 180 x 210mm,
Round section diameter: 180mm.
Cutting capacity @45°:
Box section 180 x 110mm,
Round section diameter: 110mm.
Weight 137kg.

Geared Drive Bandsaws

Convincing arguments: quality, efficiency and price. User-friendly safety switch according to IP54 with under voltage release and protective motor switch. Three blade speeds via gear shifting mechanism. Robust cast iron design. Lowering using hydraulic system with continuous adjustment. Coolant system supplied as standard. Ball bearing 5 point blade guide. Quick action vice. Automatic limit stop. Chip brush.

Standard Accessories:
Bi-metal blade.
Hydraulic counter pressure cylinder.
Machine sub structure.
Material limit stop.
Quick action vice.
Coolant equipment.

Models S181G: 0330-0176 240V 1PH / 0330-0182 415V 3PH

Specifications:
Maximum capacity details:
Cutting range at 0 (Round): 180mm.
Cutting range at 0 (Square): 180 x 240mm / 65 x 300mm.
Cutting range at 45 (Round): 110mm.
Cutting range at 45 (Square): 170 x 110mm.
Blade speed: 39/66/82 m/min.
Blade size: 2362 x 19mm.
Dimensions: 1275 x 450 x 1100mm.
Weight: 130kg.
Motor power: 750w.

Ajax Machine Tools

Ajax hydraulic power hacksaw machines are manufactured from a solid cast iron construction and a practical design. The machine vice swivels to allow angular cutting, the bow has infinitely variable cutting feed with automatic cut off at end of cut with rapid bow return.

The machine is complete with blade, length setting gauge, re-circulating coolant system, swarf collection tray, bar end support, bundle cutting and roller stand, fully CE marked.

Hydraulic Power Hacksaw

Model Number: AJPH380
Supply: 400V/3ph 50Hz.
Motor rating: 2hp
Maximum cut diameter @90: 380mm.
Maximum cut diameter @45: 150mm.
Maximum cut rectangular @90: 330 x 350mm.
Blade speed: 80/100/120SPM.
Blade size: 550 x 45 x 2.3mm.
Weight: 645kg.

Osaki™ Optional Accessories

A range of optional accessories to suit the Osaki? Mini Milling/Drilling Machine (OSA-271-5500K) are available.

For full details please refer to our catalogue.

3MT Direct Drive Collet Set

Osaki™ Optional Accessories

A range of optional accessories to suit the Osaki™ Mini Metalworking Lathe (OSA-271-5000K) are available.

For full details please refer to our catalogue.

11 Piece Brazed Turning Tool Set

SIP® 12" Disc Sander

01953
230v (13amp) supply.
550W induction motor.
Heavy-duty cast iron table provides a solid work base.
Cast alloy mitre fence.
Magnetic NVR switch.
2 year warranty.

SIP® Trade 10" x 6" Planer/Thicknesser

01550
The ideal machine for working on rough-sawn or twisted timber. Offering rapid conversion from planer to thicknesser and integrated interlock mode switch for safety. Large precision-machined work table and fully adjustable planning fence. Includes built-in dust extraction and collection. Calibrated thickness scale. Anti kick-back lock for added safety against recoiling wood. Powered feed rollers. Supplied with cabinet stand. 2 year warranty.

Specifications:
Supply: 230v (13amp).
Motor: 1600w (2.1hp).
Max. working width: 254mm.
Cutterblock speed: 6700rpm.
Max. depth of cut: 3mm - adjustable (planing).
Thicknesser height capacity: 6-160mm.
Cutterblock knives: 2.
Surface table length: 1050mm.