Vario Optimum Drill/Mill Tilting Head - Variable Speed

BF20 Vario
Extremely stable drilling-milling machine for a precise, fast and secure fabrication. Infinite drive with electronic regulation and digital sleeve travel indicator included. Digital Quill travel indicator, precision of reading 0.01mm, mm/inch conversion.



Features:
Sturdy and precision dovetail slide way with adjustable tapered gibs. Infinitely variable drive with electronic regulation. Dynamic regulation of revolutions from 100 to 3,000rpm. Easy and clear operation thanks to individually adjustable control panel. Automatic off-switch for easy operation, with under voltage circuit breaker, right-left hand rotation. Cam controlled. Infinitely variable speed adjustment. Digital sleeve travel indicator, precision of reading 0.01mm. Positive clamping of the spindle sleeve in the drill head. Integrated work table, table illumination. High concentricity precision 0.01mm measured in the spindle sleeve. Expanding bellows as guide protection. Two stage gear transmission making excessive motor power unnecessary. D.C. motor with permanent speed monitoring. The drill head can be swivelled plus/minus 90 thus permitting milling and drilling operations in any angular position. Fine crossfeed of spindle sleeve when milling. Spindle sleeve feed via stargrip (drilling). Upright can be displaced laterally to enable longer travels and centred machining of the work piece on the cross table even when the head has been swivelled. Adjustable end stops. Feed spindles can be adjusted without clearance thanks to adjustable spindle nuts.

Specifications:
Drilling capacity (max): 16mm.
Milling cap. of inserted tooth cutter (max): 63mm.
Milling cap. of end mill cutter (max): 20mm.
Throat depth: 185mm.
Spindle holding fixture: 2MT/M10.
Spindle speeds: 100-3000rpm.
Spindle travel: 50mm.
T slot size: 12mm.
Table size: 500x180mm.
Z Travel: 280mm.
Y Travel: 175mm.
X Travel: 280mm.
Motor: 50Hz 850W.
Dimensions (LxWxH): 670x550x860mm.
Net weight: 103kgs.

Standard Accessories
Drawbar M10.
Work table illumination.
Digital sleeve travel indicator.

Osaki™ Optional Accessories

A range of optional accessories to suit the Osaki™ Mini Metalworking Lathe (OSA-271-5000K) are available.

For full details please refer to our catalogue.

Knurling Attachment

Ajax machine Tools

The PBS 250V heavy duty bandsaw has a micro alignment of blade through ball bearings. Dovetail slide with take up gib. Rapid approach vice. Adjustable hydraulic feed. Automatic cut off. Variable speed: No belt change. No time wasting. Standard accessories: Coolant pump & accessories. Instructions.
Optional accessories: Single roller stand 1-625-994 MSR4 4 roller adj. stand 0335-7610.

PBS 250V Heavy Duty Bandsaw

Maximum capacity @90:
Round 250mm,
Square: 250x250mm,
Rectangular: 250x415mm (HxW).
Maximum capacity @45:
Round: 190mm,
Square: 190x190mm,
Rectangular: 250x190mm (HxW).
Vice capacity: 450mm. Blade size: 3300x27x0.9mm.
Blade speed - stepless: 25-75m/min.
Mitre cut: 45.
Motor: 2hp.
Weight: 325kg.
Dimensions: 1750x575x1120mm (LxWxH).

Osaki™ Hobbyist Mini Machines

Osaki™ mini machines include a mini lathe, mini bench drill and mini milling/drilling machine. These are ideal for the hobbyist, their small size make them ideal for use in the home workshop/garage. Whilst being small they retain a lot of the features found on larger industrial machines, either as standard or available as accessories. For DIY use. Not warranted for industrial use.

Mini Milling/Drilling Machine

A must for model makers. Bench mounted, this Milling/Drilling machine has a spindle rotation of of up to 45°, making it a very capable tool. An assortment of useful accessories are available. This versatile tool has been manufactured to meet European Machinery Directive 98/37/EC and is both CE and RoHS compliant.

Specifications:
Swing over bed: 180mm.
Drilling capacity: 13mm.
End milling capacity: 16mm.
Face milling capacity: 30mm.
Headstock travel (Z): 180mm.
Cross axis: 100mm.
Longitudinal axis: 220mm.
Spindle rotary angle: +/-45°.
Output power: 350W.
Spindle speed: Low range 0-1100rpm +/-10%. High range: 0-2500rpm +/-10%.
Spindle taper: MT3 or R8.
T-slot: 12mm.
Net/gross weight: 50/68kg.
Packing size: 540 x 500 x 760mm.

FOR DIY USE
Not warranted for industrial use.

Model D420 x 1000 420mm Swing x 1000mmDBC 3ph 0340-1160

Induction hardened and precision ground heavily ribbed prismatic bed. Substructure and lathe bed made from a single block of Meehanite cast iron. Camlock spindle nose D1-6. Oil-quenched hardened work spindle bedded in two readjustable precision taper roller bearings. Guaranteed concentricity precision of the spindle nose 0.015mm. Smooth running work spindle gearwheels hardened and precision ground. Leadscrew and feed shaft drive easily switchable via oil quenched feed gear. Adjustable safety coupling of the feed shaft. The tailstock may be shifted plus/minus for taper turning. Right - left - hand rotation can be switched with the help of the indexing spindle. Emergency stop mushroom switch, lockable main switch. Removable gap bed. Adjustable dial of the threading gauge. Mechanical foot spindle brake. Manufactured to DIN 8606 (toolmakers precision).

Standard accessories:
200mm 3 jaw chuck, 250mm 4 jaw chuck, 350mm face plate, steady rest, follow rest, coolant system, rear splash guard, spindle brake, 2-step drive motor, electrically interlocked chuck guard, turret limit stop with fine adjustment acting as end stop on lathe saddle, machine lamp, threading gauge, operating tools.

Specifications:
Between centres: 1000mm.
Centre height: 210mm.
Max.turning diameter: 420mm.
Max turning diameter over saddle: 255mm.
Max turning diameter over gap: 590mm.
Bed width: 250mm.
Spindle hole: 52mm.
Spindle taper: 6MT.
Tailstock taper: 4MT.
Spindle: D1-6.
No of spindle speeds: 16.
Spindle speeds: 45-1800rpm.
Longitudinal feeds: 0.05-1.7mm/rev.
Cross feeds: 0.025-0.85mm/rev.
Pitch metric (39): 0.2-14mm.
Pitch inch (45): 2-72tpi.
Modular thread (18): 0.3-3.5mp.
Trapezoid thread (21): 8-44dp.
Top slide travel: 140mm.
Cross slide travel: 230mm.
Sleeve travel: 120mm.
Max. Tool shank: 20mm.
Main motor power: 4.5kW.
Coolant pump: 0.1kW.
Size (LxWxH): 195x91x135cms.
Weight: 1570kgs.

Osaki™ Optional Accessories

A range of optional accessories to suit the Osaki™ Mini Metalworking Lathe (OSA-271-5000K) are available.

For full details please refer to our catalogue.

Chuck Guard Assembly

SIP® 12" Disc Sander

01953
230v (13amp) supply.
550W induction motor.
Heavy-duty cast iron table provides a solid work base.
Cast alloy mitre fence.
Magnetic NVR switch.
2 year warranty.

Vari Turret Milling Machine

ETM-2VS R8 Variable Speed 1-199-200
3 AXIS DRO. Power feed to three axis. Versatile machine for drilling - milling and boring operations. Heavy-duty and sturdy machine is made of meehanite casting of generous proportion. Rigid machine is rated for continuous use and will give you longer life expectancy. Accurate engineering tolerances have been met by highly skilled engineers during manufacture. 3HP motor allows you to take large cuts during your production runs. R8 spindle allows you to use a large selection of standard tooling. Automatic stop is to up/down feed at the end of the pre-set travel. Angular positioning to left/right through worm and gear for ease. Reversible switch allows you to run spindle clock and counter clock wise. Centralised one-shot lubrication ensures lubrication to all parts otherwise inaccessible. Metric dials with DRO allow you to work in either Inch or Metric calibrations. Hardened slide ways gives the machine much longer production life. Quill feed at three rates of feed give you the option to select the correct feed to quill to suit your individual production requirements. Servo type variable longitudinal cross and vertical feed and rapid. Electrically interlocked spindle guard conforms to the latest CE regulations and Health and Safety Standards.

Standard accessories:
Power feed to quill - three rates. Servo type longitudinal, cross and vertical feed and rapid.
One shot lubrication.
Coolant system.
Electrically interlocked spindle guard.
Low volt machine light.

Specifications:
Table size: 228 x 1245mm.
Table travel (long): 838mm.
Saddle travel (cross): 300mm.
Knee travel (vertical): 400mm.
Quill travel: 127mm.
Ram travel: 315mm.
Spindle motor: 2.2KW (3HP).
Spindle taper: R8.
Quill power feed: 0.04, 0.08, 0.15mm/rev.
Spindle speeds: 70 - 4200 variable speed.
Overall length: 1700mm.
Overall width: 1600mm.
Overall height: 2130mm.
Spindle to table: min. 0mm, max. 415mm.
Spindle to column: min 170mm, max 485mm.
Weight: 100kg.

SIP® Trade 4"x8" Belt/Disc Sander

01926
Handles most sanding jobs on hard and soft woods and optimal belt and disc speeds ensure maximum efficiency. Comprises large capacity 0°-45° tilting 8" sanding disc and 0°-90° tilting belt sander. Supplied with 2 adjustable sanding tables and mitre guide, adjustable belt sander for horizontal or vertical use. 2 year warranty.

Specifications:
Supply: 230v (13amp).
Motor: 750w (1hp).
Disc workable tilt: 0º-45º.
Belt tilt: 0-90º.
Disc speed: 2800rpm.
Belt speed: 500 m/min.

SIP® Trade 8" x 8" Planer/Thicknesser

01552
Cast aluminium, machine surfaced table tops for accurate planing of long lengths of timber. The thicknesser has power-feed rollers for a consistently smooth finish. Includes built-in dust extraction and collection. Built-in safety interlocks. Adjustable 90°-45° surface planning face for square and chamfered planning (extruded alloy construction). 2 year warranty.

Specifications:
Supply: 230v (13amp).
Motor: 1500w (2hp).
Max. working width: 204mm.
Cutterblock speed: 8500rpm.
Max. depth of cut: 2mm-adjustable (planing).
Thicknesser height capacity: 6-210mm.
Cutterblock knives: 2.
Surface table length: 740mm.
Weight: 32kg.