Osaki™ Optional Accessories

A range of optional accessories to suit the Osaki? Mini Milling/Drilling Machine (OSA-271-5500K) are available.

For full details please refer to our catalogue.

Chuck Guard Assembly

Model D330x1000, 0340-1007 3ph, 0340-1006 1ph

Rigid heavily ribbed, hardened and precision ground cast iron bed with V guideways. Camlock spindle nose D1-4. Hardened oil running headstock spindle with high precision, realignable tapered bearings. Guaranteed spindle nose runout less than 0.015mm. Closed quick action feed and screw cutting gears running in oil bath. Simultaneous engagement of lead screw & power feed levers is prevented by interlocking. Adjustable slip clutch of lead screw. Forward/reverse spindle switch. Safety switch with no-volt release, emergency stop and motor protection. Foot brake. Gap bed. Manufactured to DIN 8606 (Toolmakers Precision).

Specifications:
Centre height: 165mm.
Max swing over bed: 330mm.
Max swing over saddle: 198mm.
Max swing in gap: 476mm.
Length of gap: 115mm.
Distance between centres: 1000mm.
Width of bed: 187mm.
Spindle bore: 38mm.
Spindle nose: D1-4.
Spindle taper: MT 5.
Tailstock taper: MT 3.
No of spindle speeds: 8.
Range of spindle speeds: 70?2000rpm.
Leadscrew dia/pitch: 22mm, 3mm.
Cross feed: 0.033 ? 0.933mm/rev.
Longitudinal feed: 0.097 ? 2.713mm/rev.
Metric threads: 0.4 ? 7mm.
Imperial threads: 4 ? 56tpi.
Diametral threads: 8 ? 120dp.
Module threads: 0.2 ? 3.5mp.
Top slide travel: 85mm.
Cross slide travel: 170mm.
Motor power: 1.5kW.
Tool section: 16mm.
Size (LxWxH): 193 x 75 x 151cm.
Net weight: 600kg.

Osaki™ Hobbyist Mini Machines

Osaki™ mini machines include a mini lathe, mini bench drill and mini milling/drilling machine. These are ideal for the hobbyist, their small size make them ideal for use in the home workshop/garage. Whilst being small they retain a lot of the features found on larger industrial machines, either as standard or available as accessories. For DIY use. Not warranted for industrial use.

5-Speed Pillar Drill

PDB132
This versatile machine has a smooth running 350W motor for drilling holes up to 13mm. It can be set to 5 different speeds for versatility and performance when drilling different materials. Complete with a tilting rise and fall work table it operates from a standard 13amp plug.

Power input: 350W.
Motor output: 210W.
Supply voltage: 230V - 50Hz.
Spindle travel: 50mm.
Spindle taper: MT2.
Table size: 156 x 160mm.
Base size: 314 x 200mm.
Column diameter: 46mm.
Drilling speed: 580-2650RPM.
Sound power: 75.1 dB(A).
Sound pressure: 62.1 dB(A).
Max distance from spindle axis to surface of column: 104mm.
Max distance from spindle end to surface of table: 200mm.
Max distance from spindle end to surface of base: 290mm.
Overall size: 355 x 225 x 580mm.
Net weight: 19kg.

FOR DIY USE
Not warranted for industrial use.

Geared Head Pedestal Drill

Quantum B28 GS
Drilling spindle with precision ball/taper roller bearings. Convincing arguments: quality, efficiency and price. Spindle assembly with guaranteed concentricity precision less than 0.02mm measured in the drilling spindle sleeve. Easy to operate automatic off switch (IP 54 compliant), with low voltage release, emergency stop switch, fwd/rev spindle rotation. With gear drive for direct force fit drive. Speed selection via two control levers on the sides of the drill head. Adjustment of the drill head height via toothed rack. Powerful, smooth running 2 speed electric motor directly flanged onto the gear head. Largely dimensioned, solid drilling table, precisely machined with diagonally running T-slots, heavily ribbed at the back. Worktable height can be adjusted via a toothed rack.

Standard Accessories:
Quick Action drill chuck.
Arbor to suit.

Specifications:
Model: B28 GS.
Stock Number: 0333-4283.
Drilling cap. steel max: 30mm.
Drilling cap. cast iron max: 38mm.
Threading steel max: M12.
Threading cast iron max: M16.
Working range: 315mm.
Sleeve travel: 140mm.
Spindle taper: 3MT.
Distance spindle-table max: 660mm.
Distance spindle-base max: 1075mm.
Working surface table: 310 x 360mm.
Working surface base: 305 x 297mm.
T-slot size: 14mm.
Spindle speeds: 100 - 2900rpm.
Number of steps: 8.
Motor power 2 speeds: 750W.
Column diameter: 100mm.
Size (LxWxH): 55 x 47 x 170cms.
Weight: 270kg.

Vari Turret Milling Machine

ETM-2VS R8 Variable Speed 1-199-200
3 AXIS DRO. Power feed to three axis. Versatile machine for drilling - milling and boring operations. Heavy-duty and sturdy machine is made of meehanite casting of generous proportion. Rigid machine is rated for continuous use and will give you longer life expectancy. Accurate engineering tolerances have been met by highly skilled engineers during manufacture. 3HP motor allows you to take large cuts during your production runs. R8 spindle allows you to use a large selection of standard tooling. Automatic stop is to up/down feed at the end of the pre-set travel. Angular positioning to left/right through worm and gear for ease. Reversible switch allows you to run spindle clock and counter clock wise. Centralised one-shot lubrication ensures lubrication to all parts otherwise inaccessible. Metric dials with DRO allow you to work in either Inch or Metric calibrations. Hardened slide ways gives the machine much longer production life. Quill feed at three rates of feed give you the option to select the correct feed to quill to suit your individual production requirements. Servo type variable longitudinal cross and vertical feed and rapid. Electrically interlocked spindle guard conforms to the latest CE regulations and Health and Safety Standards.

Standard accessories:
Power feed to quill - three rates. Servo type longitudinal, cross and vertical feed and rapid.
One shot lubrication.
Coolant system.
Electrically interlocked spindle guard.
Low volt machine light.

Specifications:
Table size: 228 x 1245mm.
Table travel (long): 838mm.
Saddle travel (cross): 300mm.
Knee travel (vertical): 400mm.
Quill travel: 127mm.
Ram travel: 315mm.
Spindle motor: 2.2KW (3HP).
Spindle taper: R8.
Quill power feed: 0.04, 0.08, 0.15mm/rev.
Spindle speeds: 70 - 4200 variable speed.
Overall length: 1700mm.
Overall width: 1600mm.
Overall height: 2130mm.
Spindle to table: min. 0mm, max. 415mm.
Spindle to column: min 170mm, max 485mm.
Weight: 100kg.

Osaki™ Hobbyist Mini Machines

Osaki™ mini machines include a mini lathe, mini bench drill and mini milling/drilling machine. These are ideal for the hobbyist, their small size make them ideal for use in the home workshop/garage. Whilst being small they retain a lot of the features found on larger industrial machines, either as standard or available as accessories. For DIY use. Not warranted for industrial use.

Mini Milling/Drilling Machine

A must for model makers. Bench mounted, this Milling/Drilling machine has a spindle rotation of of up to 45°, making it a very capable tool. An assortment of useful accessories are available. This versatile tool has been manufactured to meet European Machinery Directive 98/37/EC and is both CE and RoHS compliant.

Specifications:
Swing over bed: 180mm.
Drilling capacity: 13mm.
End milling capacity: 16mm.
Face milling capacity: 30mm.
Headstock travel (Z): 180mm.
Cross axis: 100mm.
Longitudinal axis: 220mm.
Spindle rotary angle: +/-45°.
Output power: 350W.
Spindle speed: Low range 0-1100rpm +/-10%. High range: 0-2500rpm +/-10%.
Spindle taper: MT3 or R8.
T-slot: 12mm.
Net/gross weight: 50/68kg.
Packing size: 540 x 500 x 760mm.

FOR DIY USE
Not warranted for industrial use.

Osaki™ Optional Accessories

A range of optional accessories to suit the Osaki™ Mini Metalworking Lathe (OSA-271-5000K) are available.

For full details please refer to our catalogue.

160mm Diameter Face Plate

Heavy-Duty Vertical Bandsaws

Heavy-Duty suitable for continuous use. High quality electrics and limit switches to blade wheelcovers make safe to use and conform to CE. Air pipe keeps the visibility clear near the cutting edge

Standard Accessories:
Saw blade butt welder with integrated annealing unit.
Blade shear, grinder & built-in blade and tyre cleaning brush.
Lo-volt light.
Set of tools.
Instruction manual and parts list.
Rip fence for straight, repeated cutting and is easily adjustable for varied size.
Mitre protractor for angular cutting.

Model KV50 20? Throat 1-631-200

Cutting blade to column: 520mm.
Capacity max. work height: 310mm.
Table size: 600x500mm.
Table inclination (4 ways): 15.
Blade length: 3880mm.
Max width: 16mm.
Blade speeds stepless: Low 15-55m/min, High 96-390m/min.
Butt welder capacity: 2.4KVA 3-16mm.
Drive motor: 1.5kW.
Weight: 500kgs.

SIP Trade 3.0hp Dust Collector – Four Bag

01956
For up to 3 Machines
Triple input capable of running one, two or three woodworking machines simultaneously. Powerful 3hp induction motor gives smooth, long lasting performance. Very sturdy steel construction. Mounted on free running castors for increased manoeuvrability. Quick release stops. Inlet blanking adaptors supplied. Connection hose not included. 2 year warranty.

Specifications:
Supply: 230v (13amp).
Motor: 2230w (3hp).
Fan diameter: 300mm.
Inlet diameter: 1x150mm or 3x100mm (with adaptor).
Air flow: 6963 m3/hour.
Bag capacity: 2x153L.
Weight: 59kg.

Ajax Machine Tools

The range of Ajax gear head pedestal mounted drilling machines are known for their high quality, robust design and manufactured in Europe.

The range starts at 25mm capacity up to the huge 70mm capacity machine, all gear driven heads fully immersed in oil are designed for heavy-duty and long life and total range has automatic drill ejection from spindle.

Push button control of forward/reverse spindle direction, emergency switch, interlocked drill guard, table rise and fall by rack and pinion movement, ease of speed change.

The machines have in-built low voltage lighting and are fully CE marked. 2 year warranty.

All machines from the AJ32 upwards are complete with automatic spindle feed which can be preset to a desired depth, coolant pump and piping.

Gear Head Pedestal Drill

Model No: AJ32
Drilling Capacity: 32mm
Spindle Taper: MT4
Spindle Travel: 160mm
Speed: 75-2100rpm
No. of Speeds: 8
No. of Feeds: 3
Table Size: 400x420mm
Voltage: 400V 3pH 50Hz
Main Motor: 1.1kW
Weight: 292Kg

For all dimensional specifications please refer to our catalogue.