Model D420 x 1000 420mm Swing x 1000mmDBC 3ph 0340-1160

Induction hardened and precision ground heavily ribbed prismatic bed. Substructure and lathe bed made from a single block of Meehanite cast iron. Camlock spindle nose D1-6. Oil-quenched hardened work spindle bedded in two readjustable precision taper roller bearings. Guaranteed concentricity precision of the spindle nose 0.015mm. Smooth running work spindle gearwheels hardened and precision ground. Leadscrew and feed shaft drive easily switchable via oil quenched feed gear. Adjustable safety coupling of the feed shaft. The tailstock may be shifted plus/minus for taper turning. Right - left - hand rotation can be switched with the help of the indexing spindle. Emergency stop mushroom switch, lockable main switch. Removable gap bed. Adjustable dial of the threading gauge. Mechanical foot spindle brake. Manufactured to DIN 8606 (toolmakers precision).

Standard accessories:
200mm 3 jaw chuck, 250mm 4 jaw chuck, 350mm face plate, steady rest, follow rest, coolant system, rear splash guard, spindle brake, 2-step drive motor, electrically interlocked chuck guard, turret limit stop with fine adjustment acting as end stop on lathe saddle, machine lamp, threading gauge, operating tools.

Specifications:
Between centres: 1000mm.
Centre height: 210mm.
Max.turning diameter: 420mm.
Max turning diameter over saddle: 255mm.
Max turning diameter over gap: 590mm.
Bed width: 250mm.
Spindle hole: 52mm.
Spindle taper: 6MT.
Tailstock taper: 4MT.
Spindle: D1-6.
No of spindle speeds: 16.
Spindle speeds: 45-1800rpm.
Longitudinal feeds: 0.05-1.7mm/rev.
Cross feeds: 0.025-0.85mm/rev.
Pitch metric (39): 0.2-14mm.
Pitch inch (45): 2-72tpi.
Modular thread (18): 0.3-3.5mp.
Trapezoid thread (21): 8-44dp.
Top slide travel: 140mm.
Cross slide travel: 230mm.
Sleeve travel: 120mm.
Max. Tool shank: 20mm.
Main motor power: 4.5kW.
Coolant pump: 0.1kW.
Size (LxWxH): 195x91x135cms.
Weight: 1570kgs.

Osaki™ Optional Accessories

A range of optional accessories to suit the Osaki™ Mini Metalworking Lathe (OSA-271-5000K) are available.

For full details please refer to our catalogue.

Chuck Guard Assembly

TGL-YCM-085

TGL-YCM-085
Adjustable left cutting angle from 0° to 45°. Blade tensioning device. Base with integrated vice. Cuts without lubrication. Powerful 850W, digital variable speed motor with noise reduction system for very quiet operation. Anti-reset safety function and ergonomic hand-grip.

Technical Data
Motor: 850W - 240V.
Blade size: 1330 x 13 x 0.65mm.
Capacity: @90° 85mm @45° 60mm.
Blade variable speed: 30 ~ 80m/min.
Dimensions (L x W x H): 680 x 290 x 480mm.
Weight: 19kg.

Ajax machine Tools

The PBS 250V heavy duty bandsaw has a micro alignment of blade through ball bearings. Dovetail slide with take up gib. Rapid approach vice. Adjustable hydraulic feed. Automatic cut off. Variable speed: No belt change. No time wasting. Standard accessories: Coolant pump & accessories. Instructions.
Optional accessories: Single roller stand 1-625-994 MSR4 4 roller adj. stand 0335-7610.

PBS 250V Heavy Duty Bandsaw

Maximum capacity @90:
Round 250mm,
Square: 250x250mm,
Rectangular: 250x415mm (HxW).
Maximum capacity @45:
Round: 190mm,
Square: 190x190mm,
Rectangular: 250x190mm (HxW).
Vice capacity: 450mm. Blade size: 3300x27x0.9mm.
Blade speed - stepless: 25-75m/min.
Mitre cut: 45.
Motor: 2hp.
Weight: 325kg.
Dimensions: 1750x575x1120mm (LxWxH).

Heavy-Duty Vertical Bandsaws

Heavy-Duty suitable for continuous use. High quality electrics and limit switches to blade wheelcovers make safe to use and conform to CE. Air pipe keeps the visibility clear near the cutting edge

Standard Accessories:
Saw blade butt welder with integrated annealing unit.
Blade shear, grinder & built-in blade and tyre cleaning brush.
Lo-volt light.
Set of tools.
Instruction manual and parts list.
Rip fence for straight, repeated cutting and is easily adjustable for varied size.
Mitre protractor for angular cutting.

Model KV40 16? Throat 1-631-100

Cutting blade to column: 410mm.
Capacity max. work height: 300mm.
Table size: 600x500mm.
Table inclination (4 ways): 15.
Blade length: 3350mm.
Max width: 16mm.
Blade speeds stepless: Low 15-55m/min, High 96-390m/min.
Butt welder capacity: 2.4KVA 3-16mm.
Drive motor: 1.5kW
Weight: 440kgs

Ajax Machine Tools

Ajax vertical bandsaws are suitable for for cutting steels, alloys, plastics, wood and resins, the machines are a fabricated steel design ensuring rigidity and guaranteeing maximum working life.

The machine features variable blade speed and is fitted with a blade shear, welder, grinder and annealing unit, giving the facility of cutting internal shapes, by breaking the blade passing through component, welding grinding and annealing prior to cutting.
Fully CE marked.

Standard features
Emergency stop switch.
Variable speed with display.
Welder, grinder, annealing and shear.
Worklight.
Rip fence and mitre protractor.

Vertical Bandsaws

Model Number: AJVB400
Voltage: 400v/3ph 50Hz
Throat Depth: 410mm
Working Height: 300mm
Blade Length: 3350mm
Height: 1935mm
Blade speed: 20-500m/min.
Blade width: 16mm (5/8").
Motor rating: 2hp.
Table size: 600x500mm.
Table tilt: 15x4 ways.
Weight: 440kg

Ajax Machine Tools

The range of Ajax gear head pedestal mounted drilling machines are known for their high quality, robust design and manufactured in Europe.

The range starts at 25mm capacity up to the huge 70mm capacity machine, all gear driven heads fully immersed in oil are designed for heavy-duty and long life and total range has automatic drill ejection from spindle.

Push button control of forward/reverse spindle direction, emergency switch, interlocked drill guard, table rise and fall by rack and pinion movement, ease of speed change.

The machines have in-built low voltage lighting and are fully CE marked. 2 year warranty.

All machines from the AJ32 upwards are complete with automatic spindle feed which can be preset to a desired depth, coolant pump and piping.

Gear Head Pedestal Drill

Model No: AJ70
Drilling Capacity: 70mm
Spindle Taper: MT5
Spindle Travel: 300mm
Speed: 35-1238rpm
No. of Speeds: 12
No. of Feeds: 6
Table Size: 600x600mm
Voltage: 400V 3pH 50Hz
Main Motor: 5.5kW
Weight: 1150Kg

For all dimensional specifications please refer to our catalogue.

SIP® Trade 4"x8" Belt/Disc Sander

01926
Handles most sanding jobs on hard and soft woods and optimal belt and disc speeds ensure maximum efficiency. Comprises large capacity 0°-45° tilting 8" sanding disc and 0°-90° tilting belt sander. Supplied with 2 adjustable sanding tables and mitre guide, adjustable belt sander for horizontal or vertical use. 2 year warranty.

Specifications:
Supply: 230v (13amp).
Motor: 750w (1hp).
Disc workable tilt: 0º-45º.
Belt tilt: 0-90º.
Disc speed: 2800rpm.
Belt speed: 500 m/min.