Sherwood® Knuckle Form Ripper Cutters

Sherwood® 'Rippal' 3 flute ripper cutters have centre cutting as standard and as they are manufactured from HSS-Co 8% they operate at higher speeds and feeds than conventional shank milling cutters, removing more metal per minute. The Sherwood® 'Rippal' cutter's unique geometry ensures a more efficient cutting action and reduced cutting time helps you to reduce costs and increase productivity. Power and workholding rigidity must be checked carefully before use as it is recommended that 'Rippal' cutters are used with consistent power feed rates to eliminate backlash.

Sherwood® 'Rippal' cutters are available polished or unpolished and with a weldon or combination shank.

930M Series 3 Flute 'Rippal' Ripper Cutters Weldon Shank HSS-Co 8%

Dormer HSCO Jobber Drills

A901 HSCo PFX Alcrona Top Jobber Drill
High productivity "one-hit" drilling to 6xD
Alcrona Top coating for extended tool life.
Excellent performance across a wide range of materials.
Size Range: 1.5 - 16.0mm, 1/16” - 5/8”

Walter Titex Centre Drills HSS

Designed with spiral flutes and various lengths and forms to give high quality centre holes that suit most applications. 60 inclusive angle. Manufactured to BS328;Part 2:1986, DIN333A, ISO866, ISO2540, ISO2541.

For all dimensional specifications please refer to our catalogue.

Series K1911 - Inch

Indexa-Seiki VDI Toolholders

Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburised and hardened. Surface hardness of 58 - 60HRC. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.

ER Collet Chucks

E4 to DIN 6499/B

Sherwood® Slitting Saw Blades

Sherwood® HSS slitting saws are used for cutting metal, these small diameter saws are hollow ground to give the clearance necessary for deep cutting.

Sizes up to 1" diameter do not have key ways.

For all technical and dimensional specifications please refer to our catalogue.

Slitting Saw Small Diameter HSS

Indexa-Seiki? Indexable Boring Bars

Indexa-Seiki??s range of indexable tooling includes, face mills, end mills, boring bars and turning toolholders. All Indexa-Seiki? indexable tooling is manufactured to recognised ISO standards to ensure that the insert is clamped securely in the toolholder or milling body. The exceptional stability of Indexa-Seiki? indexable tooling when in operation, ensures you achieve the precision that you require in the finished component, every time.

Indexable tooling is the modern solution for all machining applications as the carbide inserts held in indexable tool holders can be changed as required to machine different types of material, many inserts have multiple cutting faces, once one face is blunt simply rotate the insert in the toolholder this flexibility helps to eliminate expensive down time and regrinding costs helping you to increase production and drive down running costs.

We are confident that from our selection of indexable toolholders, you will find the tool appropriate to the machining operation you are carrying out.

A full range of spares are readily available for all Indexa-Seiki? Indexable Tooling, please refer to our catalogue for details.

For all technical and dimensional specifications please refer to our catalogue.

PWLNR Boring Bar

95 Approach for negative 80 trigon inserts

SPMX

QP25C (ISO P10-P35) CVD Coated. Milling grade for Steels and some Stainless Steels.

Indexa-Seiki? Screw-On External Toolholders

For further technical and dimensional specifications please refer to our catalogue.

STGCR - Right Hand

90 Approach for 7 positive trianglar inserts.

Allied Maxcut Series Z Holders

Diameter range: 11.10 to 12.95mm.

For all dimensional specifications please refer to our catalogue.

Taper Shank

Guhring Production Jobber Drills HSS-Co 5%

Rigid, high-heat resistant drill with large helix angle of 35. Suited for titanium and titanium alloys, stainless steels and heat resisting austenitic steels. Limited suitability for special alloys such as hastaloy, inconel, nimonic etc. Manufactured to DIN338.

Series 605 - Metric